User's Manual Part 1

Setup and Survey
HiPer XT Operator’s Manual
3-12
10. Click the Ports tab and set the following port parameters for the
serial port (Figure 3-9).
• Output drop-down list – select type and format of differential
corrections.
• Period (sec) – enter interval at which receiver will generate
differential corrections.
• Baud rate drop-down list – select a baud rate (i.e., the rate at
which differential messages will be transmitted from receiver
to modem).
• RTS/CTS – select to enable handshaking.
TIP
TIP
Use a 38400 baud rate.
Figure 3-9. Base Configuration – Ports
11. Click Apply. The receiver begins sending data to the selected
port.
For more details on the settings available for configuring the Base
station, refer to the PC-CDU User’s Manual.