User's Manual Part 1

Surveying with the Receiver
P/N 7010-0713
3-15
and High correspond to the indicator's 95%, 99.5% and
99.9% states, respectively. The higher the specified
confidence level, the longer the integer ambiguity search time
6. Click the Ports tab and set the following parameters for the serial
port (Figure 3-12):
• Input drop-down list – select the desired differential
correction format.
• Period (sec) – leave as is.
• Baud rate drop-down list – select a baud rate (i.e., the rate at
which differential messages will be transmitted from modem
to receiver).
• RTS/CTS – select to enable handshaking.
TIP
TIP
Use a 38400 baud rate.
Figure 3-12. Rover Configuration – Ports
7. Click Apply.
8. Click OK to close the Receiver Configuration dialog box.