User's Manual

Receiver and File Maintenance
HiPer Ga/Gb Operator’s Manual
5-12
Loading an OAF
Topcon Positioning System dealers provide customers with OAF
files. For any OAF related questions, e-mail TPS at
[e-mail] and include the receiver’s ID number (see the
bottom of the receiver for the ID).
1. To load a new OAF, follow steps one and two in “Checking the
Receiver’s OAF” on page 5-10.
2. Click Load at the bottom of the Option Manager dialog box (see
Figure 5-15 on page 5-11).
3. Navigate to the location of the new Option Authorization File.
OAFs have .jpo or .tpo extensions and are unique to each receiver
(Figure 5-16).
Figure 5-16. Load OAF
4. Select the appropriate file, and click Open (Figure 5-16). The
new receiver option loads onto the receiver, and the Option
Manager table updates.
5. When finished, click Exit on the Option Manager dialog box,
and then click FileDisconnect to prevent conflicts with serial
port management.