User's Manual

Loading New Firmware
P/N 7010-0816
5-19
1. In FLoader, click the Device tab, and set the Device Type to
“Receiver.” Click Get from Device for device information
(Figure 5-19).
Figure 5-19. Set Device Type
2. Click the Program tab, and set the Capture Method to “Soft
Break Capture” (recommended) (Figure 5-20 on page 5-19).
Figure 5-20. Program Tab Settings
3. Browse for and select the receiver board’s RAM file and Flash
file (Figure 5-20).
4. Click Load and wait until 100% of the files load into the receiver.
NOTICE
If you selected an incorrect file, an error message
displays at the bottom of the dialog box. Select the
correct file.