User's Manual

Modem-TPS Problems
P/N 7010-0816
6-13
• Make sure your Bluetooth enabled devices use the same
security settings.
• See “Bluetooth Module Configuration,” on page 2-17 for
details on changing security settings.
 Bluetooth module settings may have changed.
1. If you changed settings for your Bluetooth module,
remove it from the list of discovered Bluetooth devices
using the Bluetooth manager program (supplied with the
device used to manage the receiver).
2. Repeat the search.
Modem-TPS Problems
The following is the most commonly encountered Modem-TPS
problem.
Modem-TPS cannot connect to the receiver
 The receiver is turned off.
Ensure the receiver has power and is turned on.
 If using a cable, the cable’s connectors are improperly attached.
• Check that the cable connector is attached to the correct
serial port.
• Unplug the cable, then securely and properly reconnect it to
the receiver.
 If using a cable, the cable is damaged.
• Use an undamaged cable.
• Contact your Dealer to purchase a new cable.
 If using Bluetooth wireless technology, the incorrect port is
selected, or the receiver or computer does not support
Bluetooth.
• Use a computer or receiver that has Bluetooth wireless
technology enabled/installed.