User's Manual

Introduction
HiPer Ga/Gb Operator’s Manual
1-16
Other Accessories
This package can include the following accessories.
The power supply unit (p/n 22-034101-01) charges the internal
batteries when connected to a grounded outlet (Figure 1-5). This unit
converts the alternating current (AC) normally supplied from an
electrical outlet to a direct current (DC) used to charge the batteries
and/or power the receiver.
The power supply unit connects directly to the receiver. For details,
see the power related sections on page 2-13.
Figure 1-5. Power Supply Unit
USB cable
Connects the receiver to an external
device (controller or computer) for
high-speed data transfer and
receiver configuration.
p/n 14-008031-01
Serial cable
Connects the receiver to an external
device (controller or computer) for
data transfer and receiver
configuration.
p/n 14-008005-03
CAUTION
The power supply unit should only be used for
charging the batteries. Do not use as a power source
during surveying.
Table 1-3. Package Cables (Continued)
Cable Description Cable Illustration