User's Manual

Configuring the Radio Modem
P/N 7010-0816
3-3
Configuring the Radio Modem
Modem-TPS is Topcon’s radio modem configuration utility for
modems embedded in Topcon receivers. Modem-TPS (version 2.2p2
or newer) provides the following functions:
• Connecting a computer to an integrated radio modem via a serial
port or Bluetooth wireless technology.
• Displaying information about the radio modem installed in the
receiver.
• Programming the radio modem’s settings.
Topcon’s configuration and surveying software, TopSURV or
Pocket-3D, also have the ability to configure Topcon receivers. Refer
to the TopSURV or Pocket-3D manuals for details.
Configuring a Digital UHF
Radio Modem
The integrated radio modem provides TX/RX UHF communications
between a Base Station and a Rover. To configure the UHF radio
modem, have the following ready:
• PC running Windows 98 or newer
• Modem-TPS 2.2p2 or newer
• A Serial cable or Bluetooth connectivity with PC
1. Connect the computer and receiver using an RS-232 cable or
Bluetooth wireless technology. Turn on the receiver.
NOTICE
When finished configuring the radio modem,
always disconnect from Modem-TPS before exiting
to prevent conflicts with serial port management.
NOTICE
To comply with RF exposure requirements,
maintain at least 25cm between the user and the
radio modem.