User's Manual

Managing Power
PoweringtheReceiver
33
P/N:7010Ͳ1004
Power Supply Unit
Thepowersupplyunit(p/n22Ͳ034101Ͳ01)chargestheexternalbatterieswhenconnectedtoagroundedoutlet.Thisunit
convertsthealternatingcurrent(AC)normallysuppliedfromanelectricaloutlettoadirectcurrent(DC)usedtocharge
thebatteriesand/orpowerthereceiver.
Youcanconnectthe power
supplyun
ittothechargingcradleordirectlytothereceiver.See“PowerSupplyUnit”on
page 34.Thepowersupplyhasthefollowingspecifications:
• inputvoltage–between100and240VAC
• frequencyofinputpower–between50Hzand60Hz
• outputvoltage–12VDC@2.5 A(30W)
Thepowersupplyunitisdesignedforindooruseonly.Donotuseinadamporawetenvironment.
Donotexposethepowersupplytorainorsnow.Itshouldonlybeusedforchargingthebatteries.
Donotuseasapowersourceduringsurveying.