User's Manual

Managing Power
PoweringtheReceiver
37
P/N:7010Ͳ1004
1. PlugthereceiverͲtoͲSAEpowercableintothe
receiver’spowerinputport.
2. Connectthereceiver ͲtoͲSAEpowercableandthe
powersupplyͲtoͲoutletcabletotheACadapter.
3. PlugthepowersupplyͲtoͲoutletcableintoan
availableoutlet.Thebatteriesarefullycharged
afterapproximately6hours.
To
chargetheb
atteriesusingthechargingcradle:
1. Removethebatteriesfromthereceiverandinsert
themintothechargingcradle.
2. Connectthepowercabletothepowersupplyunit.
3. ConnecttheSAEconnectorsonthepoweradapter
cableandpowersupplyunit.
4. Connectthepoweradaptercabletooneofthe
ports
onthechar
gingcradle(eitherportwillcharge
both/eitherbattery).
5. Plugthepowersupplytoanavailableoutlet.The
batteriesarefullychargedafterapproximately6hours.
Leaving the Batteries on Charge
Thebatteriescanbesafelyleftinthereceiverorthechargingcradleoncechargingiscomplete.Doingsowillnot
overchargeordamagethebatteries.
To grounded outlet