User's Manual

Managing Power
InsufficientPower
44
P/N:7010Ͳ1004
Insufficient Power
Ifthebatteriesbecomefullydischargedandanexternalpowersupplyisnotconnected,thereceiverwillshutdownand
automaticallysaverecordedfiles.Toavoiddisruptions,checktheBATLEDonthedisplaypanelforthebatterycharge
status.See“BatteryLED”onpage 25formoreinformation.
Ifthereceiver
shutsdo
wnduetoinsufficientpower,thereceiverandallcommunicationportsbecomedeͲactivated.
Torestorepowertoyourreceiverandturnitbackon,dooneorallofthefollowing:
• Rechargethebatteries.
• Makesurethepowercableiscorrectlyconnectedtothereceiver’sport.
a. Alignthekeywayswhenconnectingthepower/serialcabletothereceiverport.
b. Turnthecablelockclockwiseuntilitclickstosecurethecableinplace.
c. Todisconnectthecable,turnthelockcounterͲclockwise,andthengentlyremovethecable.
• Connectthereceivertoadifferentpowersource.
PowersuppliedtothereceivershouldmatchthespecificationsprovidedbyTopconontheproduct.Failureto
complywiththesespecificationsmaydamagethereceiver.See“Specifications”onpage 78.