User's Manual

FieldSystemSetup
57
P/N:7010Ͳ1004
• • • • • •
Field System Setup
Thischapterdescribesthefieldsetupofyournewreceiver,soitisreadyforuseasaBase,network,RTKRover,orstaticdata
collector.
Setting Up the Base Receiver
1. InstallaheavyͲdutytripod(p/n:22Ͳ050501Ͳ01)
overaknownpoint.Youdonotneedauniversal
tribrachandtribrachadapterwhenworkingwith
thistripod.

2. Attachtheantennatothemodemantenna
connector.
3. Levelthetripodandtightenthescrews.
4. Attachanyotheraccessoriesasneeded,suchasa
backͲuppowersupply.
5. Measuretheheightofthereceiverfromthe
groundusingthetapemeasure.See“Measuring
AntennaHeight”onpage 59.
6. ViewtheLEDdisplaypanelfor
there
ceiver’s
currentstatus.Seealso“DisplayPanelOperations”
onpage 19.
GR-5 Receiver
Heavy Duty Tripod