User's Manual

Field System Setup
SettingUptheRoverReceiver
58
P/N:7010Ͳ1004
Setting Up the Rover Receiver
1. Ifneeded,attachthequickdisconnecttothe
bipod/rangepole.
2. Attachthereceivertothequickdisconnect.
Makesurethereceiverlocksintoplace.
3. Ifyouarenotusingafixe dheightroverpole,
measuretheheightofthereceiverfromthe
ground.See“MeasuringAntennaHeight”on
page 59.
4. Attachtheantenna
tothean
tennaconnector.
5. Pressthepowerbuttontoturnonthe
receiver.Theintegratedwirelessdeviceinthe
receiverturnsonwhenthereceiveris
powered.
6. ViewtheLEDdisplaypanelforthereceiver’s
currentstatus.Seealso“DisplayPanel
Operations”onpage 19.
UseabipodduringpostͲprocess
surveystoensurethe
antenna/receiverdoesnot
moveduringdatalogging.
Lock
GR-5 Recevier
5/8 inch Screw
Quick Disconnect (Optional)