User's Manual

Collecting Data
Memory
63
P/N:7010Ͳ1004
Installing the SD/SDHC Card
1. Makesurethereceiveristurnedoff.
2. Removethedetachablebatterytotheleftofthe LEDDisplaypanel.
3. CarefullyinserttheSD/SDHCcard,labelͲsidedown,intothecardslotlocatedatthetopofthebattery
compartment.
Oncethereceiveristurnedon,thereceiverboardwilldetecttheSD/SDHCcard,
anditwi
llbereadytouseas
needed.
Initializing the File System
TheGRͲ5supportsaremovableSDHCmemorycardtolograwdatafiles.Thememorycardmustbeinitialized beforeits
firstuse.Initializing thememorycardwhileinthereceiverensuresthecardisformattedtotheTPSproprietaryfilesystem
(TPFS).Thisfilesystemallowsthereceiverto
cr
eate,store,retrieve,delete,andrestorerawdatafiles.
ItisalsoadvisabletoreͲinitializethememorycardperiodically(e.g.,quarterly).Thiserasesanydataonthecard,checks
forbadblocks,andsetsthecardupafresh.
TheusercanuseTRUtoinitializethefilesystem.
AlwaysinitializethefilesystemontheinstalledSD/SDHCcardbeforethefirstuse.TheInitialization procedure
isdescribedbelow.