User's Manual

Collecting Data
RecordingData
65
P/N:7010Ͳ1004
Recording Data
YoucanlograwGNSSdatatothereceiver’sSD/SDHCcardandusetheTopconReceiverUtility(TRU)orMAGNETOffice™
softwaretodownloadthefilestoacomputer.
Tostartorstoprecordingdata,usetheLEDdisplaypanelorTRU:
1. PressthePowerbuttontoturnonthereceiver.
2. WaitfortheSTATLEDtoindicat esatellitesarebeing
tracked.TheSTATLEDblinksgreenforGPSsatellitesand
amberforGLONASSsatellites. Ashortredblinkindicates
thereceiverhasnotsolvedaposition.Fiveormore
satellitesprovideoptimal
positioning.
3.
Tobeginrecording,pressandholdtheFUNCTIONbutton,
andthenreleaseit(between1and5seconds)whenthe
REC(Recording)LEDturnsgreen.
4. MakesuretheREClightblinksgreen.Thisindicatesthata
filehasopenedanddatacollectionhasstarted.TheREC
LEDblinkseachtime
dataissa
vedtotheSD/SDHC
memorycard.IftheREClightblinksred,thereceiverhas:
• ahardwareproblem
• noSD/SDHCcardinstalled
• notenoughspaceonthememorycard???
• animproperOAF (See“AbouttheOAF”onpage 50)
5. YoucanalsoselectFileExplorer

Logs

StartinTRUtobeginrecordingdata.
FUNCTION
FUNCTION
FUNCTION
Button
Press the FUNCTION
button for 1–5
seconds to start/stop
data logging.