User's Manual

5
Wireless LAN ON/OFF
Follow the procedure below to turn on the wireless LAN function.
(1) Tap Start > Settings > Connections tab.
(2) On the [Wireless Manager] display, tap on the [Wireless LAN] icon.
(3) Select or clear the Turn on and off Wireless LAN check box
(4) When the Wireless LAN function is turned ON, the wireless LED will flash in green
color.
Set up a wireless LAN link
Ensure that the two devices are turned on, discoverable, and within close range.
(1) Tap Start > Settings > Connections tab.
(2) Tap Wireless LAN > Devices tab > Search. Your device searches for other
devices with Wireless LAN capabilities or access points, and displays them in the list.
(3) Tap the name or ESS ID of the access points or other device, and tap Next.
(4) If an encryption code would be requested you could put it to the encryption code
box in the display. Then tap Next
(5) Tap Finish
Make a device discoverable
Other devices with wireless LAN capabilities can detect your device and attempt to
beam information to it, establish a partnership, or use a wireless LAN service.
(1) Tap Start > Settings > Connections tab.
(2) Tap Wireless LAN
(3) Select the Turn on Wireless LAN check box, and then select the Make this
device discoverable to other devices check box
Other Wireless LAN-enabled devices can now detect your
Field Controller and attempt
to establish a Wireless LAN link, or use a wireless LAN service.
For more “How to and/or Help” on Wireless LAN, see the User’s Manual of your
Field Controller;