User's Manual

Nomenclature and Functions
Operation
1
Mount the LS-B10W on the instrument and position a rotating laser.
2
Raise or lower the machine blade or arm to position the cutting edge or bucket at the desired grade elevation.
3
Tu rn on the LS-B10W.
4
Keep the machine blade or arm motionless and raise or lower the LS-B10W and adjust until ON-GRADE position are flashing. This is the ON
GRADE position. The reference position has been set.
5
While operating, use the LED display to continually check grade, moving the blade or cutting / filling according to the direction of the LS-B10W
display.
How to set up the wireless communication default setting
Place the LS-B10W and RD-10W in close position, so that they will not be affected by other wireless communications.
1
Tu rn on the power for both the LS-B10W and RD-10W.
2
Long-push the wireless communication switch for the LS-B10W and RD-10W. When setting up, the instrument will be in the communication set-up
status, and the LED (yellow light) will flash slowly.
3 When the instrument is ready to be used, a buzzer will sound (buzzer sound: peep) and the communication will begin. During communication, the
LED will flash quickly.
How to use wireless communication
1
When power for both the LS-B10W and RD-10W are turned ON, communication will automatically begin.
• If the communication fails, a buzzer will sound (buzzer sound: pi, pi, pi) and the LED will turn off. Eliminate any influence from other
wireless instrument and redo the communication default setting.
• While setting up the default, only the default OFF (short-push of the wireless communication switch) is operable.
• When changing the setting for detective precision, buzzer sound and LED ON/OFF, the setting for the RD-10W will also change in
conjunction with the LS-B10W.
• If you wish to change the RD-10W to communicate, redo the communication default setting.
• If the LED continues to flash, a communication error is occurring. If flashing continues after turning off the power and on once again,
please inquire with your sales agent.
Battery cover knob
Battery cover
Magnet
Index
Wireless communication switch
Communication ON/OFF: Short push
CAN Connector
Power switch
Power ON: Short push
Power OFF: Long push
LCD back light ON/OFF: Short push when
power is ON
(Auto turn-off after two minutes)
Indicator(LCD)
Detective precision (Mode) switch
Buzzer sound switch
Buzzer sound:
Quiet/Loud/OFF: Short push
LED ON/OFF: Long push
Indicator(LED)
Detector
Buzzer speaker
• See [Laser beam positions and display patterns] in the Instruction manual for the display area and display
pattern.
• This instrument is able to perform wireless communication with the RD-10W, sold separately.
See the RD-10W Instruction manual for details on the RD-10W.
• This instrument is mounted with a CAN communication function. Please inquire with your sales agent for
details.