Installation Guide

Universal Installation Instruction

Lavatory Faucet

For easy installation of your faucet, please ensure the following:

Read thoroughly all the instructions before installing the faucet.

Read and understand all warnings

Check all the components in the package.

PLEASE CAREFULLY READ THIS INSTRUCTIONS MANUAL BEFORE INSTALLING AND USING

THE PRODUCT.

PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE REGARDING PRODUCT

OPERATION AND MAINTENANCE.

Attention: Before you install the faucet,

）

Please make sure the direction of the faucet should face to.

2) Please divided the hot water and cold water.

3) Please make sure you shut off the water supply.

Tools you may need.

Electric drill

Safety goggles

Adjusttable wrench

Pliers

Srewdriver

Pencil

Cleaning and Care

Care should be exercised when cleaning this product. Although its finish is durable, it can be

damaged from harsh abrasives and cleaning pads. To clean, use light, non-abrasive cleaning

solution or cleaning polish.

PAGE 1
Universal Installation Instruction Lavatory Faucet For easy installation of your faucet, please ensure the following: Read thoroughly all the instructions before installing the faucet. Read and understand all warnings Check all the components in the package. PLEASE CAREFULLY READ THIS INSTRUCTIONS MANUAL BEFORE INSTALLING AND USING THE PRODUCT. PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE REGARDING PRODUCT OPERATION AND MAINTENANCE.
PAGE 2
Lock nut style 1) 2) 3) 4) 5) 6) 7) 1 2 3 4 5 6 Body Thread tube Soft Washer Hard Washer Lock nut Inlet supply line 2 pcs Handle Remove the soft washer (3), hard washer(4) and lock nut(5) from the faucet thread tube(2). Screw and hand tighten the hot and cold flexible hoses(6) to the faucet. DO NOT use a wrench to tighten hoses as this may damage the hose and/or the hose threads. Install faucet through center hole of your basin or conter.
PAGE 3
Content: 1) Body 2) Thread tube 3) Soft Washer 4) Hard Washer 5) Lock nut 6) Inlet supply line 2 pcs 7) Handle Big Lock nut stlye: 1 Remove the soft washer (3), hard washer(4) and lock nut(5) from the faucet thread tube(2). 2 Screw and hand tighten the hot and cold flexible hoses(6) to the faucet. DO NOT use a wrench to tighten hoses as this may damage the hose and/or the hose threads. 3 Install faucet through center hole of your basin or conter.