Operation Manual

Multi-Sensor / Stud Detector Use
0800 / 328 6020
GB
00800 / 4467 5888
IRE
15
AFTER SALES SUPPORT

GB/IRE Free
Mail: [e-mail]
Model: GT-MM-10 09/2014

IRE
GB
Select mode
X Press the MODE button to select the required mode
STUD > METAL > DEEP >AC.
Calibrating device
The device must be calibrated to the characteristics of the body (wall, floor,
ceiling):
z prior to the start of each search
z regularly during a search process (after every 60 seconds)
Calibration is required again after 60 seconds, in order to reduce the
occurrence of measurement errors.
1. Hold device against the surface (selection location whether the object
searched for is very unlikely to be).
2. Keep calibration press down and do not move the device, 3 short beeping
tones confirm successful calibration.
3. Continue to keep key pressed and start search.
Multisensor UK A6.book Seite 15 Montag, 19. Mai 2014 3:52 15