Operation Manual

Multi-Sensor / Stud Detector Use
0800 / 328 6020
GB
00800 / 4467 5888
IRE
17
AFTER SALES SUPPORT

GB/IRE Free
Mail: [e-mail]
Model: GT-MM-10 09/2014

IRE
GB
Searching for/detecting the hidden object
a) Display shows only the mode or max. 1 bar = no object nearby.
When you are approaching the sought object, at least 2 bars of the LC display
are filled. With a full bar diagram, please make a mark at this point (see
illustration).
The search/detection process is the same in all 4 modes
and is clarified on the basis of the illustration.
The found object must be crossed twice with the device
each time. The crossing takes place in opposite directions.
After calibration, slide the device slowly and in a horizontal
direction along the wall (see illustration). Do not lift or tip
the device.
Multisensor UK A6.book Seite 17 Montag, 19. Mai 2014 3:52 15