User's Manual

•

Repair and replacement of the DPF regeneration control module.

2.9 Anti-theft Matching (IMMO)

This function can match the anti-theft key after replacing the ignition

key, ignition switch, instrument cluster, engine control unit (ECU),

body control module (BCM), and remote control battery.

2.10 Tire Pressure Reset (TPMS RESET)

This function can reset the tire pressure and turn off the tire pressure

fault indicator when the car tire pressure fault indicator light is on.

2.11 Suspension Level Calibration (SUS RESET)

This function can adjust the vehicle body height sensor for level

calibration after replacing the vehicle height sensor or control module

in the air suspension system, or when the vehicle level is not correct.

2.12 Headlight Matching (AFS RESET)

This function can initialize the adaptive headlight system. The

headlight system can decide whether to automatically turn on the

headlights based on the ambient light intensity, monitor the vehicle’s

driving speed, body posture, etc., and adjust the headlight lighting

angle.

2.13 Gearbox Matching (GEARBOX)

This function can complete the self-learning of the gearbox and

improve the shift quality, when the gearbox is disassembled or

repaired which may cause shifting delay or impact.

2.14 Sunroof Initialization (SUNROOF)

This function can set the sunroof lock off, close in rain, memory

function of sliding / tilting sunroof, outside temperature threshold,

etc.

2.15 Crank Position Sensor Adaptive Learning (GEAR LEARN)

This function can perform gear learning for the car, to turn off the

related Malfunction Indicator Light (MIL).

It needs to be performed in the following cases:

•

After the engine ECU, crankshaft position sensor, or crankshaft

ywheel is replaced.

•

The DTC “tooth not learned” is present.