User's Manual

Phoenix Pro User Manual
125
4. Tap “Clear all data” to start resetting until the tool automatically reboots.
5. How to register your Phoenix Pro or new VCI connector?
Note: Before registration, please make sure the network is properly connected.
A. If this is the first time using the handset, please refer to "Chapter 4.2.1" in the
user manual for product registration.
B. If you have activated a VCI before, but bought a new VCI due to the loss or
other reasons, please follow the below steps to activate:
1. Tap the application icon on the home screen to run it.
2. Tap "Personal Center" -> "Activate VCI".
3. Input product S/N and activation code, which can be found from the
included password envelope, then tap "Activate".
4. After activation completed, tap "Personal Center" -> "VCI" to check if the
activated VCI is displayed in the list or not. Multiple VCIs can be bound to
one tool. If you intend to use one of the VCIs to diagnose or test a vehicle,
just switch to the corresponding one.
6. How to update the APK and diagnostic software?
1. Tap the application icon on the home screen to run it.
2. Tap "Software Upgrade".
3. Tap "Select all" if all the software needs to be downloaded. To cancel the
selection of certain software, just click the check box before it. Tap "Update"
on the bottom of the screen to start the download. During the upgrade, please
make sure the handset has a stable network connection.
7. How to pair the VCI with the Phoenix Pro handset?
Users can pair the VCI with the Phoenix Pro handset via Bluetooth when testing
the vehicle or in system settings.
1. Turn the ignition on.
2. Plug the VCI directly (or use the OBD-II extension cable) into the vehicle’s
DLC.
3. On the home screen, tap
Setting -> Bluetooth
.
4. Set Bluetooth "ON". Phoenix Pro will search for all the available Bluetooth
devices automatically.
5. Tap the name of the VCI (98********00, where ******** stands for 8 digits) to