User's Manual

Phoenix Pro User Manual

4. Connect the other end of the adaptor to the included VCI connector.

5. To supply power to OBD I adaptor from:

A. Cigarette Lighter Cable: Connect one end of the cigarette lighter cable to

vehicle’s cigarette lighter receptacle, and the other end to the power jack of

OBD I adaptor.

Fig. 4-12

B. Battery Clamps Cable: Connect one end of the battery clamps cable to

vehicle’s battery, and the other end to the power jack of OBD I adaptor.

Fig. 4-13

4.5 Bluetooth Setting

There are two kinds of ways available for Phoenix Pro to pair with the VCI

connector.

1. Connect one end of the USB cable (optional) to the Mini USB port of the VCI

connector.

2. Connect the other end to the USB port of the PC. The power indicator of the

VCI connector lights up.

3. Enter Bluetooth setting screen by tapping “Settings” -> “Bluetooth”, slide the

Bluetooth switch to ON and Phoenix Pro will start searching for all available

Bluetooth device.