User's Manual

Phoenix Pro User Manual

comparison.

• Value: Tap to display the parameters in texts.

• Customize: Tap , a pull-down list of the data stream items appears on

the screen. Select (Maximum 4 data stream items can be selected)

/deselect the desired items and then screen will display/remove the

waveforms corresponding to these items immediately.

Fig. 5-31

Report:

To save the current data in text format.

All reports are saved under the tab

“Diagnostic Report” in “My Report” from “Personal Center” menu. For details on

report operations, please refer to Chapter 14.1 “My Report”.

Record:

Tap to start recording diagnostic data for future playback and analysis.

The saved file follows the naming rule: It begins with vehicle type, and then the

record starting time (To differentiate between files, please configure the accurate

system time). The file is stored in “My Report” under “Personal Center” menu.

E. Actuation Test

This option is used to access vehicle-specific subsystem and component tests.

Available test vary by vehicle manufacturer, year, and model.

During the actuation test, the Phoenix Pro handset outputs commands to the

ECU in order to drive the actuators, and then determines the integrity of the

system or parts by reading the ECU data, or by monitoring the operation of the

actuators, such as switching a injector between two operating states.

In Fig. 5-23, tap “Actuation Test”, the system will display as follows: