Operation Manual

12 Setup

2.4.1 Connecting to the broadcasting cable

Whatever sort of connection you have be-

tween the digital receiver and the television,

you need to connect the digital receiver to the

broadcasting cable so that it can receive digi-

tal television broadcasts. Connect the broad-

casting cable to the CABLE IN connector. If

you have another digital receiver, you may

link it from the CABLE OUT connector.

2.4.2 Connecting to your television set

For all the following connections of the digital receiver, we rec-

ommend you to use the ﬁrst connector to get the best picture

quality. If your television does not have a matching connector,

then use the next connector in the following order for a better

picture quality.

1. HDMI connector (HDMI)

2. Component connector (YPbPr)

3. Composite connector (VIDEO)

You should conﬁgure audio and video settings after connect-

ing up the digital receiver. See §4.2 for a detailed description.

To use the HDMI output

If you have a high deﬁnition television set,

you should use an HDMI cable for best re-

sults. Plug one end of the cable into the HDMI

socket on the digital receiver, and plug the

other end into the matching socket on your

television. In this case, you do not have to

make audio connection because it can output

stereo audio or digital audio as well.