Operation Manual

80 Recording and Playback
In the same manner as making
a timer recording, you can
make a timer descrambling. See
§7.1.2 for timer recording. To
begin with, you should move
recordings you want to de-
scramble to the AutoDescramble
folder. Press the button
in the timer list to launch the
auto-descrambling option box.
The most recommended would be to set the File Selection
option to Auto, Mode to Every Day, and Original File to
Save. From now on, the only thing you have to do for auto-
descrambling is to move scrambled recordings to the AutoDe-
scramble folder every time you find them.
NOTE
You should get the scrambled recordings descrambled as
soon as possible. You could lose the chance to descram-
ble forever if you hang around too long because broadcast-
ing operators frequently changes the key signal for descram-
bling.
7.4 Editing a recording
You can cut out or save a part such as commercial from a
recording by performing the following steps:
1. Press the button to display the progress bar during a
playback.
2. Move to the beginning scene of the part you want to edit
by holding down the or button.
3. Press the button, then the pointer starts to blink.
4. Move to the end scene; the part is marked in black.