Operation Manual

2 Setup
2.2 Safety precautions 9
• The mains plug shall remain readily operable so that it
can be removed easily to disconnect the power.
• When placed in a cabinet, make sure there is a minimum
space of 10 centimetres around it. For the physical spec-
ification of the digital receiver, refer to Table 2.2.
• Protect the power cord from being walked on or pinched.
If the cord is damaged, do not use the digital receiver and
get the cord replaced.
• Refer all servicing to a qualified service technician.
• To maintain proper ventilation, always leave sufficient
space around the digital receiver.
Table 2.1: Power specification
Input voltage 90 to 250 V AC, 50/60 Hz
Power consumption 60 W at maximum in active
Under 1 W in passive standby
LNB power 13 V, 18 V, 500mA Max.
Table 2.2: Physical specifications
Size 380× 60× 265 mm
Weight(Net) 3.1 kg
Operating temperature 0 to 45
◦
C
Storage relative humidity 5 to 90 %