Operation Manual

3 Service Search

3.5 Resetting to user settings 31

NOTE

A factory reset will not delete any recorded programmes.

However, you have to search services again after a factory

reset.

3.5 Resetting to user settings

You can store your own data including the following:

• Satellite list

• Services list

• Favourite lists

• Preference settings

Also you can restore them at any time.

To store your data, select the Installation > System Recovery >

Store System Data menu, then you get asked for conﬁrmation.

If you select Yes, your data will be stored. Whenever you store

your data, they are all overwritten. To restore your data, select

the Installation > System Recovery > Recover System Data

menu, then you get asked for conﬁrmation. With the choice of

Yes, your data will be restored.

You can also store your data to an external storage. To store

your data to an external storage, select the Installation > Sys-

tem Recovery > Export System Data menu, then you get asked

for conﬁrmation. With the choice of Yes, your data will be

stored. Every time you store your data, they are all overwrit-

ten.

To restore your data from an external storage, select the Instal-

lation > System Recovery > Import System Data menu, then

system data will be listed. Select a data and press the









OK but-

ton, then your data will be restored.

You can edit the channel data on your computer by using a

channel editor software, Vega, which is available from Top-

ﬁeld’s website, http://www.i-topfield.com/eng/download/

utility_list.asp.