Operation Manual

6 Introduction
.
.
.
32




M switches the output of the TV SCART socket over be-
tween the digital receiver and the device connected to the
VCR SCART socket. See §4.2.4 for more details.
.
.
.
33




SAT displays the satellites list with their services list.
.
.
.
34
is used to start reverse playback. Subsequent presses
increase the rewind speed.
.
.
.
35
pauses live television or playback of a recorded pro-
gramme.
.
.
.
36
is used to start fast forward playback. Subsequent
presses increase the playback speed.
.
.
.
37
resumes normal playback speed, or displays the
progress bar for navigation on playback or time-shift. To
play a recorded programme, see button
.
.
.
17
.
.
.
.
38
is used to jump back to the beginning of the recording
on playback.
.
.
.
39
is used to start slow motion playback. Subsequent
presses change the playback speed.
.
.
.
40
is used to jump to the end of the recording on playback.
.
.
.
41
has different functions per menu.
NOTE
When using the remote control, point it at the remote sensor
on the front panel of the digital receiver.
1.3 Common Interface
There are pay TV services available; these are acces-
sible with the use of a Conditional Access Module
(CAM) and a subscription card. A Common Inter-
face (CI) is the slot into which you can insert a CAM.
The front of the digital receiver has two common in-
terface slots. To watch a pay service, you should take
the following steps: