Operation Manual

Table Of Contents

2.4 Connecting up your digital receiver 13

to the LNB 2 IN connector with a loop cable, even though the

digital receiver is designed to operate independently over

two antennas.

NOTE

Perhaps you are expecting that the satellite antenna could

simultaneously catch all frequencies coming from a satellite

and send them to the digital receiver. However, the satellite

antenna only sends the frequencies that it can catch with the

LNB frequency and polarisation speciﬁed by the digital re-

ceiver. So if you have linked from the LNB 1 OUT connector

to the LNB 2 IN connector, you would have some limitations

in using some features such as dual recording. Likewise, if

you have another digital receiver linked from the LNB 2 OUT

connector, you can only use it limitedly. See §3.1 for more

details.

2.4.2 Connecting to your television set

For all the following connections of the digital receiver, we rec-

ommend you to use the ﬁrst connector to get the best picture

quality. If your television does not have a matching connector,

then use the next connector in the following order for a better

picture quality.

1. HDMI connector (HDMI)

2. Component connector (YPbPr)

3. SCART connector (TV)

4. Composite connector (VIDEO)

You should conﬁgure audio and video settings after connect-

ing up the digital receiver. See §4.2 for a detailed description.