Operation Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Setup
- 3 Service Search
- 4 Preference Settings
- 5 Every Day Use
- 6 Organising Services
- 7 Recording and Playback
- 8 Entertainment
- 9 Accessing via Network
- 10 Firmware Update
- A Universal Remote Control
- Index
4
4.8 Options for on-screen display 45
a video file with a subtitle file, if the subtitle does not match the
video, then you can synchronise them by adjusting the value
of the Sync option. In addition, you can change the colour and
size of subtitle by setting the Font Color and Font Size options
to one you prefer.
4.8 Options for on-screen display
To set the options for the on-
screen display (OSD), select the
Settings > OSD menu. You
should see a screen like the left
figure.
To adjust the transparency level of the OSD, set the OSD Trans-
parency option as you desire. Its available range is 0 to 50 per-
cent.
To adjust the display time of the information box, set the Info
Box Display Time option as you desire. Its available range is
1 to 30 seconds. If you set this option to No Info Box, the in-
formation box will not be displayed when you switch services.
However, pressing the button will display the informa-
tion box. If you set this option to Never Hide, the informa-
tion box will always be displayed. For the information box, see
§5.2.3.
In addition, you can raise or lower the position of the infor-
mation box. Set the Info Box Position option as you desire. Its
available range is −10 to +3 lines. The higher you set the op-
tion, the lower the information box will be positioned.