Operation Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Setup
- 3 Service Search
- 4 Preference Settings
- 5 Every Day Use
- 6 Organising Services
- 7 Recording and Playback
- 8 Entertainment
- 9 Accessing via Network
- 10 Firmware Update
- A Universal Remote Control
- Index
72 Recording and Playback
1. Select the Recording > Recorded Program menu or
alternatively press the button to display the list of
recorded programmes.
2. Put the highlight bar on a desired recording and press
the
OK button, then an option box pops up.
3. To play from beginning, set the Starting Position op-
tion to Beginning; to play from the point that you have
stopped at the last time, set it to Continuing. To start play-
back, select the Play item.
4. To stop playback, press the button.
During playback, you can enjoy the following tricks:
• To see the detailed information about the currently
played recording, press the button; then the infor-
mation box appears and shows its file name, running
time, programme information, and so on.
• To pause playback, press the button. To resume it,
press the button.
• To view the progress bar, press the button; to hide it,
press the button again.
• When the progress bar is hidden, you can move to a de-
sired scene by entering a progress percentage with the
numeric buttons.
7.3.1 To navigate using the progress bar
First press the button to display the progress bar.
• To go forward, hold down the button; to go back-
ward, hold down the button.
• If there are no bookmarks, you can jump forward by the
minute set to the Jump time Interval option with the
F3
button. See §4.7 for that option. Refer to §7.3.4 as to how
to bookmark a position.
• To jump to the beginning, press the button.