Operation Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Setup
- 3 Service Search
- 4 Preference Settings
- 5 Every Day Use
- 6 Organising Services
- 7 Recording and Playback
- 8 Entertainment
- 9 Accessing via Network
- 10 Firmware Update
- A Universal Remote Control
- Index
7
7.6 Formatting the hard disk 77
7.6 Formatting the hard disk
If a new hard drive is installed, it must be formatted because
you can neither record nor use time-shift with an unformatted
hard disk.
You can delete permanently all contents stored in a hard drive
by formatting it. Select the Installation > System Recovery >
Format Hard Disk menu, and then select the hard drive you
want to format. To format the built-in hard drive, select the
option to Internal; otherwise to format the external hard drive
which is connected to the digital receiver, select the option to
External. With pressing the
OK button, you get asked for con-
firmation. Formatting will start with the choice of Yes.
NOTE
The hard drive on the digital receiver will be formatted in
the JFS file system.