Operation Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Setup
- 3 Service Search
- 4 Preference Settings
- 5 Every Day Use
- 6 Organising Services
- 7 Recording and Playback
- 8 Entertainment
- 9 Accessing via Network
- 10 Firmware Update
- A Universal Remote Control
- Index
8
8.1 Copying files 79
To copy from the internal to the external hard drive take the
following steps:
1. Connect an external hard drive to the digital receiver.
2. Press the button and then press the or button
to select a desired file list except the External list.
3. Put the highlight bar on a desired file and press the
F3
button, then you get asked to select between the built-in
and external hard drive.
4. Select External, then the folders are listed.
5. Select a destination folder and press the
OK button, then
the selected file will be copied into the external hard
drive.
To copy from the external to the internal hard drive, take the
following steps:
1. Connect an external hard drive to the digital receiver.
2. Press the button and then press the or button
to select the External List.
3. Put the highlight bar on a desired file and press the
F3
button, then the list of folders gets displayed.
4. Select a folder in the built-in hard drive.
5. Press the
OK button, then the selected file will be copied
into the built-in hard drive.