Operation Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Setup
- 3 Service Search
- 4 Preference Settings
- 5 Every Day Use
- 6 Organising Services
- 7 Recording and Playback
- 8 Entertainment
- 9 Accessing via Network
- 10 Firmware Update
- A Universal Remote Control
- Index
90 Accessing via Network
which should be supported by your router.
2. Configure your router with the account so that it can
communicate with the web site.
Whenever a new dynamic IP address is assigned to the router,
it will inform the DDNS service provider of the new IP ad-
dress. This makes it possible that you access the router with a
domain name at any time.
9.2 Configuring the network setting on the digital receiver
You should configure the net-
work settings to enable the web
service and FTP service. Select
the Installation > Network Set-
ting > IP Setting menu.
The easiest way to configure the network settings is to assign a
dynamic IP address to the digital receiver by setting the Con-
nection Type option to DHCP.
When the digital receiver is restarted, the dynamic IP address
could be changed more often than not, and you will have to
check what it is to access the digital receiver. To avoid this