User Guide Digital Satellite Receiver TF 5000 CI, TF 5100 CI

8 Setup

• Do not expose the digital receiver to any moisture. The

digital receiver is designed for use indoors only. Use dry

cloth when cleaning the digital receiver.

• Place the digital receiver on a ﬁrm and level surface.

• Do not place the digital receiver close to heat emitting

units or in direct sunlight, as this will impair cooling.

Do not lay any objects such as magazines on the digi-

tal receiver. When placed in a cabinet, make sure there

is a minimum space of 10 centimeter around it. For the

physical speciﬁcation of the digital receiver, refer to Ta-

ble 2.2.

• Protect the power cord from being walked on or pinched.

If wires are exposed or cord is damaged, do not use the

receiver and get cord replaced.

• Never open the digital receiver casing under any cir-

cumstances. Warranty will be void.

• Refer all servicing to an electronics qualiﬁed service tech-

nician.

Table 2.1: Power speciﬁcation

Input voltage 90 to 250 V AC, 50/60 Hz

Power consumption 28 W at maximum in operation

9 W in standby

Table 2.2: Physical speciﬁcation

Size 340× 60× 265 mm

Weight 2.4 kg

Operating temperature 0 to 45 °C

Storage relative humidity 5 to 95 %