The User’s Manual Digital Satellite Receiver TF4000Fe TF5000Fe Please read this User's Manual carefully. The menu structure and specification can be changed without notice.
TABLE OF CONTENTS TABLE OF CONTENTS INTRODUCTION............................................................................................................. 5G CONTENTS .................................................................................................................... 5G FEATURES ..................................................................................................................... 6G REMOTE CONTROL UNIT(RCU) ..................................................................
TABLE OF CONTENTS Subtitle...................................................................................................................... 38G Teletext ..................................................................................................................... 38G Sound Track.............................................................................................................. 38G Multifeed ................................................................................................
WARNING Please read the following recommended safety precautions carefully for your safety. MAINS SUPPLY : 90-250V AC 50/60 Hz. OVERLOADING : Do not overload wall outlets, extension cords or adapters as these can result in fire or electrical shock. LIQUIDS : Keep liquids away from the STB. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
INTRODUCTION INTRODUCTION Thank you for purchasing the STB. This STB is fully compliant with the international DVB standard and thus transmits digital images, sounds, information guides and teletext directly to your TV through the satellite broadcasting. Now you can comfortably see and receive digitally transmitted music, news, movie and sports satellite broadcasts in your office or at your home. The STB records and plays back satellite broadcasts. You can enjoy interesting games embedded in STB.
FEATURES FEATURES - Fully Compliant with DVB. - MPEG-2 Digital and fully DVB compliant - 22KHz On/Off - Automatic FEC detection - Automatic Service Search - DiSEqC 1.0, 1.1, 1.2 and USALS(DiSEqC 1.
FRONT/ REAR PANELS FRONT/ REAR PANELS 1) FRONT PANEL - DISPLAY During the STANDBY mode, the current time is displayed. When the power is ON, the current status is displayed (TV/ Radio/ Menu).
FRONT/ REAR PANELS 1. LNB IN z Connect the satellite antenna cable 2. LNB Out z Use it to connect to another STB 3. VIDEO OUTPUT z Video output. (YELLOW) 4. AUDIO-RIGHT OUTPUT z Audio output. (RED) 5. AUDIO-LEFT OUTPUT z Audio output. (WHITE) 6. RF IN z Connect the TV antenna 7. RF OUT z Connect the TV RF IN 8. RS232 z Upgrade the STB data & software 9. TV SCART z Connect the TV or VCR 10.
REMOTE CONTROL UNIT(RCU) REMOTE CONTROL UNIT(RCU) 1. POWER Button ( ) z Switch the STB between Operation and Standby mode. 2. MUTE Button ( ) z Enable / Disable the Audio. 3. Numeric Buttons ( ~ ) z Select the TV or Radio service services and menu options. 4. MENU Button ( ) z Display the Menu on screen or return to previous menu from submenu. 5. GUIDE Button ( ) z Display the EPG on screen when available. z Remove EPG when EPG is displayed. 6. V+/V- Buttons ( ) z Adjust the volume (Increase / Decrease).
REMOTE CONTROL UNIT(RCU) 11. RECALL Button ( ) z Select the previously viewed service. 12. TV/ Radio Button ( ) z Select the TV/Radio mode. 13. PAUSE Button ( z Pause the live picture. ) 14. TV/STB Button ( ) z Change the terrestrial TV and STB mode. 15. SOUND Button ( ) z Select Sound Track and LEFT / RIGHT / MONO / STEREO sound. z Select the multifeed service if multifeed is available. 16. SUBTITLE Button ( ) z Activate the subtitle selection window. Select the subtitle language in the list. 17.
INSTALLATION (Connection) INSTALLATION (Connection) z z z z z First, connect both the satellite antenna and the TV to the STB. There are some of the most common ways to connect the equipment in this manual. There are several ways of connecting the STB to the existing Audio/TV system. We recommend one of the following setup. If you have problems with your connections and need help, contact your dealer or service provider. Connection to TV, VCR and Hi-Fi 1) Connection to the TV with the SCART Cable.
INSTALLATION (Connection) Connection to the other Satellite Receiver. Connect the satellite antenna cable to the LNB IN socket on the STB. With other connector, connect the IF OUT socket on the STB and the LNB IN socket of the other STB or STB. GETTING STARTED Press the Power ( ) button to operate the STB from the STANDBY mode. Now, the Info Box will appear for a given time and disappear. By pressing button, the Info Box will remain on the screen.
MENU OPERATIONS MENU OPERATIONS Now this chapter assumes that the STB system has been installed correctly, meaning: • The satellite dish for the STB has been installed, connected to the STB and correctly adjusted to the proper satellite. • The STB is connected to the TV. • The RCU has batteries and ready to control the STB. If the STB has not been installed or connected properly, please refer to the INSTALLATION menu on this manual. Many of the functions of the STB are available from the Main Menu.
MENU OPERATIONS System Setting Local Time Setting The exact local current time can be adjusted by using the GMT, the Time Offset and the Mode sub menus. A. Mode By using , buttons, you can select on of the Auto/Manual mode. The Auto mode updates the time settings automatically by the GMT received from the broadcast and the Time Offset you have inserted. The Auto mode is recommended. B.
MENU OPERATIONS The Local Time is adjustable only when the Mode is in the Manual mode. Adjust the current time, if necessary, by using the numeric buttons and , buttons. C. GMT GMT is referred to the standard time of Greenwich. It cannot be changed. D. Time Offset The current time of the local area can be inserted. In another words, insert the time difference of the local time zone from the GMT. For example, if the local area is Seoul (the time difference from the GMT is 9), insert 9:00.
MENU OPERATIONS To insert new entry of Timer Setting, press (Red) Button. Press button to edit the entry, and press (Green) button to delete the selected entry. - Type : Select TV or Radio by pressing , button. - Satellite : Press button to display the satellite list. Select a satellite that includes the service to be played. - Service : Select the service to be reserved for recording by pressing button.
MENU OPERATIONS Total Block : Access to no one without PIN code. If the service is limitation free, the block function will not work. 4~18(age): Inaccessible for viewers within each minimum age limit if a maturing rating of the event is same or lower than the age limit. In case of inaccessible, the STB asks the PIN Code and check the age limit. If the service is limitation free, the block function will not work. B. Change PIN Code Go to the Change PIN Code item to configure new PIN Code.
MENU OPERATIONS A. Menu Language It is an item for changing the language of the Main menu. Select the language that the menus will be shown in. [English / French / Deutsch / Italian / Spanish / Arabic / Greek / Turkish / Danish / Swedish / Norwegian / Dutch / Russian / Polish / Persian] * The supported language can be changed without any notice. B. Subtitle Language It is an item for changing the language of the subtitle.
MENU OPERATIONS A/V Output Setting The STB has many A/V Outputs. Control this menu properly according to external components connected to the STB. Configurations concerning Audio and Video can be made here. A. TV Type Select your TV standard. For automatic PAL/NTSC selection, set it to Multi. B. Video Output Select the mode of Video output among RGB, S-Video, YUV and CVBS on TV SCART by using V- , V+buttons. C. TV Aspect Ratio Select your TV screen format. Select 4:3 or 16:9 mode by using V- , V+buttons. D.
MENU OPERATIONS OSD Transparency Adjust the OSD transparency of all the menus. The available levels are ranging from 0% to 50%. Info Box Display Time Adjust the time-out of the Info Box. Set the period of time that the Info Box is displayed on screen. The adjustable time is 0 to 30 seconds, No info box and Never Hide. Info Box Position Adjust the position of the Info Box. It allows you to change the position by using buttons.
MENU OPERATIONS Organizing Services This mode can be used to rename, reorder, lock, hide and delete TV Services. A. Browse Press button. Now, browsing through the Organizing Services is possible. Press assigned buttons on the help message. B. Rename Use , buttons to select Rename item and press button to move the cursor to the Service List. Press button to display keyboard, and rename the service. After renaming it, be sure to save it by pressing button at Save item. C.
MENU OPERATIONS F. Delete Press button to delete services. The delete function differs from the skip function as it deletes the service completely. Whereas, the skip function just makes the service invisible. NOTE: Deleted services are permanently deleted. The only way to recover them is to perform a new service search. G. Sort You can sort and rearrange the service list. Organizing Favorites This mode is helpful in adding and deleting services to and from the favorite group.
MENU OPERATIONS Installation LNB Setting The Low Noise Block down Converter (LNB) amplifies the signal received by the satellite dish and lowers the frequency of the signal. The signal is then fed from the LNB at the dish via cable to the STB. For the LNB Setting, move the cursor to Installation item and press button. Then, move the cursor to the LNB Setting item and press button. A. Satellite Name Press button to display the Satellite List. The list of Satellite is put in alphabetical order.
MENU OPERATIONS If you use a DiSEqC1.1 switch and DiSEqC1.0 switches, it is possible to connect up to 16 antennas. Connect the DiSEqC1.1 switch to the LNB input and connect the DiSEqC1.0 switches to the DiSEqC1.1 switch. Set the DiSEqC1.1 item and DiSEqC1.0 item according to the antenna configuration. For example, set DiSEqC1.1 to 2 of 4 and DiSEqC1.0 to 3 of 4 to select A7. H. DiSEqC 1.0 The STB is designed to be DiSEqC 1.0 compatible.
MENU OPERATIONS Service Search A. Satellite Name Press button to display the Satellite List Box. The list of Satellite is put in alphabetical order. Select one of the preprogrammed satellites that correspond to the direction of the antenna. If the desired satellite name is not in the list, then select Other. B. Search Mode There are 4 search modes, There are 4 search modes, Auto, Manual, Advanced and SMATV. The Auto mode enables you to search using the information the STB has.
MENU OPERATIONS This Network Search item can be used if the Search mode is set to Manual or Auto. If the Network Search item is set to On and the NIT (Network Information Table) is available, the Transponder’s information can be found. G. PID This item is valid when the Search Mode is set to Advanced only. Press button to enter Video, Audio and PCR PID’s. 1) Video PID Insert the Video PID by using the numeric buttons on your RCU. 2) Audio PID Insert the Audio PID by using the numeric buttons on your RCU.
MENU OPERATIONS Motorized DiSEqC 1.2 Service Search 00% Level 00% Quality If you have DiSEqC 1.2 motorized system, then you can use the DiSEqC 1.2 functions. A. Satellite Name Select a satellite name that will be used to identify a motor position. B. Frequency Select the transponder to catch the strong signal. Select the TP from TP list box to get the strong signal. C. LNB Setting Please refer to LNB setting of this chapter. D. Motorized DiSEqC1.2 Select Enable or Disable. If you are using DiSEqC1.
MENU OPERATIONS G . Motor Control - Goto : Move the motor to the stored position of the selected satellite. - Store : Store the current position of the motor for the selected satellite. * The followings are available only at the Installer mode. - Recalculate : Recalculate the position of the Stab Rotor motor. - Goto Ref : Go to reference. - Limit E , Limit W : Set the limits of East and West position. - Limit Off : Remove the limitation.
MENU OPERATIONS A. Motorized DiSEqC1.3 Select Enable or Disable. If you are using DiSEqC1.3 switch, set to Enable. B. Satellite Name Select a satellite that will be used to identify a motor system. C. Satellite Angle It is the longitude of the selected satellite and it can be set automatically in case of selecting a satellite name. You can use numeric keys of RCU to enter the angle. East or West will be selected by , button. D. My Longitude It means the longitude of your location.
MENU OPERATIONS SAT/TP Edit A.Satellite Name By pressing button, you can see the listed satellite names. Then,using , , or buttons, you can select satellite. B. Frequency By pressing button, you can see the all frequencies of transponders of a satellite and can select a frequency. Or, by pressing , , or buttons, you can select and view a frequency one by one. C. Symbol Rate You can see the symbol rate of specified satellite on the right side of the menu. D.
MENU OPERATIONS F. Add New TP In case of new transponder information is added by broadcaster, you can add new TP(transponder) information and enjoy new services. Before adding new TP information, you should know the frequency, symbol rate and polarization types. After adding new information, you should confirm the new information by pressing button at OK item. G. Delete TP By selecting this item, you can delete the selected TP(Transponder) information. H.
MENU OPERATIONS Motorized DiSEqC1.2 setting. The second is to reset the parameters of Motorized DiSEqC 1.2. System Recovery All the data and system setting can be stored and restored. Recover It recovers all the stored data and system setting. The factory default setting will be reloaded unless the installer stores the data and system setting by Store function. Store It stores all the data and system setting as current setting. The stored data and seting will be restored by Recover function.
MENU OPERATIONS Firmware Upgrade At this menu, you can download the latest STB software from Satellite. The TP details are as bellows. Astra FREQUENCY : S/R: Polarity : PID : Hotbird 4 FREQUENCY : S/R: Polarity : PID : 12603 MHz 22000 KS/s Horizontal 347 12673 MHz 27500 KS/s Vertical 730 For OTA (Over - The - Air Upgrade), it takes around several minutes to download software from the Satellite. To start OTA, press button at Start item. For better service, the satellite and TP can be added or changed.
MENU OPERATIONS Information You can check the IRD(STB) version and refer the calendar. IRD Status Check the STB’s system information here. It shows the System ID, Loader Version, Device Version, Application Version and Last Update. Calendar Press or button to select the year. Press 34 or button to select the month.
MENU OPERATIONS Game ExBlock Bomb Hexa Pac Man 35
FUNCTION GUIDE FUNCTION GUIDE Service List Press button to see the Service List and Help window will be displayed. Select one of the services you want to enjoy. By pressing button instead of button, satellite selection window will appear. You can select a satellite there. Sorting, alphabetic search and selecting a channel by satellite is possible. Information Box Press button on the RCU to see the program information. The Information box displays as follows: . Service Number . Service Name .
FUNCTION GUIDE . Information of subtitle and / or teletext . Parental Lock You can hide the Information Box by pressing Service Name Service Number Event Name Event Description button. Freq Signal Strength CAS, Parental Time Subtitle, Lock Information Teletext Mark Start Time ~ End Time / Dolby / Multifeed You can see the Current/Next event by pressing / button in the information box. To control the volume in the information box, you have to press / button two times without interval.
FUNCTION GUIDE Subtitle You can choose a language of subtitle using button on the RCU. If the broadcaster provides subtitles, you can see symbol in the Information Box. Teletext If the broadcaster supports teletext, you can see symbol in the Information Box. There are VBI insertion mode and software emulation mode in teletext. In the VBI insertion mode, which is always on, you can watch the teletext with your TV using the RCU of your TV. To watch teletext with VBI insertion, your TV must support teletext.
SOFTWARE UPGRADE AND PC INTERFACE SOFTWARE UPGRADE AND PC INTERFACE Software Upgrade The STB has stable and convenience software to use. But, to improve the STB the new software of the STB may be released. Whenever a problem is found or functions are added or modified, the software in the STB has to be upgraded to enjoy better function. The latest news, software, utility, driver, product and manual will be found at Topfield website http://www.topfield.co.kr.
MENU MAP MENU MAP Mode Local Time Setting Local Time GMT Time Offset Type Satellite Service Insert New Entry Mode Day WakeupTime Duration Type VCR Timer Setting Satellite Service Edit the Selected Entry Mode Day WakeupTime Duration Delete the Selected Entry System Setting Censorship Change PIN Code Time Setting Parental Control Language Setting A/V Output Setting Access Control Organizing Services Organizing Favorites Installation IRD Lock Menu Language Language Setting Subtitle Language Audio
MENU MAP OSD Transparency Info Box Display Time Info Box Position Browse Rename Move Organizing Services Lock Skip Delete Sort Organizing Favorites Add Favorite Group Edit Service Satellite Name LNB Frequency LNB Power LNB Setting 22Khz DiSEqC 1.1 DiSEqC 1.0 Service Search Satellite Name Search Mode Frequency Symbol Rate Service Search Polarization Network Search PID FTA/Scrambled Start Search… LNB Setting Satellite Name Frequency Installation LNB Setting Motorized DiSEqC1.2 Motorized DiSEqC 1.
MENU MAP My Longitude USALS Setting My Latitude Reference Position Move Frequency Goto the position Satellite Name Frequency Symbol Rate Installation Polarization SAT/TP Edit SAT Name Edit Add new TP Delete TP Add Satellite Delete Satellite Service Search Factory Setting System Recovery Recover Store Transfer Program to Other IRD Transfer Data to Other IRD Satellite Name Frequency Firmware Upgrade Symbol Rate Polarization PID Start System ID Loader Version IRD Status Device Version Application Ver
SPECIFICATIONS SPECIFICATIONS Tuner & Channel Decoder Input/Loop through Connector F-type, IEC 169-24, Female Frequency Range 950 ~ 2150MHz Signal Level Input -65 ~ -25dBm LNB Power & Polarization Vertical : +13.5VDC Horizontal : +18VDC Current : Max. 500mA with Overload Protection 22KHz Tone Frequency : 22±1KHz Amplitude : 0.65±0.2V DiSEqC Control Version 1.0/1.1/1.2/1.
SPECIFICATIONS Power Supply Input Voltage 90 ~ 250VAC, 50/60Hz Type SMPS Power Consumption Running: Max. 24W, Standby: 9W Protection Separate internal fuse. The input shall have lightning protection. Physical Specification ( 340mm Model ) Size(W x H x D) 340 x 60 x 265 mm Weight(Net) 3.0Kg Physical Specification ( 260mm Model ) * Size(W x H x D) 260 x 54 x 185 mm Weight(Net) 1.8Kg Specifications and functions may be improvement without notice in advance.
www.i-topfield.com 110T-F45B3-201-0 rev.