The User’s Manual Personal Video Recorder 7) 395 0DVWHUSLHFH 3HUVRQDO 9LGHR 5HFRUGHU Please read this User s Manual carefully. The menu structure and specification can be changed without notice.
TABLE OF CONTENTS TABLE OF CONTENTS INTRODUCTION............................................................................................................. 6G CONTENTS .................................................................................................................... 6G FEATURES ..................................................................................................................... 7G FRONT/ REAR PANELS ........................................................................
TABLE OF CONTENTS Common Interface ................................................................................................ 42G Game.................................................................................................................... 42G FUNCTION GUIDE ....................................................................................................... 43G Service List ...............................................................................................................
WARNING Please read the following recommended safety precautions carefully for your safety. MAINS SUPPLY : 90-250V AC 50/60 Hz. OVERLOADING : Do not overload wall outlets, extension cords or adapters as these can result in fire or electrical shock. LIQUIDS : Keep liquids away from the PVR. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
WARNING SERVICING : Do not attempt to service this product by yourself. Do not remove the cover. Refer all serving to qualified service agents. LIGHTNING : For protection we recommend that you connect the PVR via an external surge protection device. Disconnect the antenna cable from PVR during lighting storms. EARTHING : The antenna cable must be earthed. LOCATION : Locate the PVR indoor place properly to prevent lightening, raining and direct sunlight.
INTRODUCTION INTRODUCTION Thank you for purchasing the Personal Video Recorder (PVR). This PVR is fully compliant with the international DVB standard and thus transmits digital images, sounds, information guides and teletext directly to your TV through the satellite broadcasting. Now you can comfortably see and receive digitally transmitted music, news, movie and sports satellite broadcasts in your office or at your home. The PVR records and plays back satellite broadcasts.
FEATURES FEATURES - MPEG-2 Digital and fully DVB compliant - 2 Common Interfaces for CONAX, CRYPTOWORKS, IRDETO, NAGRAVISION, SECA & VIACCESS - 2 Tuners - 5000 channels (TV and Radio) programmable - Multilingual Audio support - Multilingual menu text support - Channel switching time less than 1 second - Channel list editing - Favorite channel list editing - True-color On-Screen Display (OSD) - Full Picture In Graphic (PIG) function - Electronic Program Guide (EPG) for on screen channel information - Subtit
)5217 5($5 3$1(/6 )5217 5($5 3$1(/6 )5217 3$1(/ 32:(5 7KH SRZHU EXWWRQ RI 67% 21 6WDQG E\ ',63/$< 'XULQJ WKH 67$1'%< PRGH WKH FXUUHQW time is displayed. :KHQ WKH SRZHU LV 21 WKH FXUUHQW VWDWXV LV displayed (TV/ Radio/ Menu).
FRONT/ REAR PANELS .G LNB 1 IN z Connect the satellite antenna cable .G IF 1 Out z Use it to connect to another STB or LNB 2 IN .G LNB 2 IN z Connect the satellite antenna cable எ.G IF 2 Out z Use it to connect to another STB ஏ.G VIDEO OUTPUT z Video output. (YELLOW) ஐ.G AUDIO-LEFT OUTPUT z Audio output. (WHITE) .G AUDIO-RIGHT OUTPUT z Audio output. (RED) ஒ.G S-VIDEO z S-Video output. Connect the S-Video input of your TV. ஓ.G TV SCART z Connect the TV SCART ஊ.G VCR SCART z Connect the VCR SCART .
REMOTE CONTROL UNIT(RCU) REMOTE CONTROL UNIT(RCU) .G POWER Button ( ) z Switch the PVR between Operation and Standby mode. .G MUTE Button ( ) z Enable / Disable the Audio. .G UHF Button ( ) z Display and alter the UHF setting in menu. எ.G TV/STB Button ( ) z Change the terrestrial TV and STB mode. ஏ.G SLEEP Button ( ) z Display the sleep time. At the sleep time, the power is automatically turned OFF and the PVR goes to the STANDBY mode. ஐ.
REMOTE CONTROL UNIT(RCU) .G SOUND Button ( ) z Select Sound Track and LEFT / RIGHT / MONO / STEREO sound. z Select the multifeed service if multifeed is available. .G V+/V- Buttons ( ) z Adjust the volume (Increase / Decrease). z Change the value of the selected item in Menu. எ.G P+/P- Buttons ( ) z Service up or down through the available services. z Move the selection bar in Menu. ஏ.G OK Button ( ) z Display Service List on screen. z Select an item in the menu. ஐ.
5(027( &21752/ 81,7 5&8 எ G %XWWRQ 6WRS WLPH VKLIWLQJ SOD\EDFN RU UHFRUGLQJ ஏ G %XWWRQ 6WDUW UHFRUGLQJ ஐ G %XWWRQ 3DXVH WKH SOD\EDFN DQG OLYH SLFWXUH G %XWWRQ 0RYH WKH SRVLWLRQ RI 6XE SLFWXUH DW WKH 3,3 E\ FRXQWHU FORFNZLVH ஒ G %XWWRQ 0RYH WKH SRVLWLRQ RI 6XE SLFWXUH DW WKH 3,3 E\ FORFNZLVH ஓ G %XWWRQ ([FKDQJH PDLQ SLFWXUH ZLWK VXE SLFWXUH DW WKH 3,3 'LVSOD\ WKH VDWHOOLWH OLVW DW QRUPDO SLFWXUH DQG DW VHUYLFH OLVW ஊ G
INSTALLATION (Connection) INSTALLATION (Connection) First, connect both the satellite antenna and the TV to the PVR. z There are some of the most common ways to connect the equipment in this manual. z There are several ways of connecting the PVR to the existing Audio/TV system. We recommend one of the following setups. z If you have problems with your connections and need help, contact your dealer or service provider. Connection to TV, VCR and Hi-Fi 1) Connection to the TV with the SCART Cable.
INSTALLATION (Connection) 4) Connection to the TV using the RF cable. Connect a terrestrial antenna to RF IN socket on the PVR. Connect one end of the RF cable to the RF OUT socket on the PVR. Connect the other end to the ANT IN socket on the TV. 5) Connection to the TV using the S-VIDEO. Connect one end of the S-VIDEO cable to the SVIDEO socket on the PVR and the other end to a S-VIDEO socket on the TV. Connection to the Antenna.
INSTALLATION (Connection) 2) Installing the PVR with one Antenna. The Connection Type in LNB setting menu should be set to Loop Through. Tuner 1 and 2 can receive the RF signal of the same polarity and the same band. 3) Installing the PVR with Twin LNB Antenna. The Connection Type in LNB setting menu should be set to Separated. 4) Installing the PVR with two separated Twin LNB Antennas and DiSEqC switches. The Connection Type in LNB setting menu should be set to Separated.
GETTING STARTED GETTING STARTED Press the Power ( ) button to operate the PVR from the STANDBY mode. Now, the Info Box will appear for a given time and disappear. By pressing info button, the Info Box will remain on the screen. The display time of the Info Box is adjustable in the System Setting menu of the Main menu. IMPORTANT: Before taking charge of your new PVR, some important technical settings are essential. - First, press the MENU ( ) button on the RCU to make the Main Menu appear.
MENU OPERATIONS MENU OPERATIONS Now this chapter assumes that the PVR system has been installed correctly, meaning: • The satellite antenna for the PVR has been installed, connected to the PVR. • The PVR is connected to the TV. • The RCU has batteries and ready to control the PVR. If the PVR has not been installed or connected properly, please refer to the INSTALLATION menu on this manual. Many of the functions of the PVR are available from the Main Menu. Press menu button to open it.
MENU OPERATIONS System Setting Time Setting The exact local current time can be adjusted by using the Mode, the GMT, the Time Offset, the Time Format, the GMT Collection, the Satellite, the Transponder and the Summer Time sub menus. A. Mode By using V- , V+ buttons, you can select on of the Auto/Manual mode. The Auto mode updates the time settings automatically by the GMT received from the broadcast and the Time Offset you have inserted. The Auto mode is recommended.
MENU OPERATIONS System Setting Time Setting The exact local current time can be adjusted by using the Mode, the GMT, the Time Offset, the Time Format, the GMT Collection, the Satellite, the Transponder and the Daylight Saving Time sub menus. A. Mode By using V- , V+ buttons, you can select on of the Auto/Manual mode. The Auto mode updates the time settings automatically by the GMT received from the broadcast and the Time Offset you have inserted. The Auto mode is recommended.
MENU OPERATIONS B. Local Time The Local Time is adjustable only when the Mode is in the Manual mode. Adjust the current time, if necessary, by using the numeric buttons and V- , V+ buttons. C. GMT GMT is referred to the standard time of Greenwich. It cannot be changed. D. Time Offset The current time of the local area can be inserted. In another words, insert the time difference of the local time zone from the GMT.
MENU OPERATIONS A. Censorship The Censorship item blocks programs according to each specific setting. Use V- , V+ buttons to select the items below. No Block : Access to everyone. Total Block : Access to no one without PIN code. If the service is limitation free, the block function will not work. 4~18(age): Inaccessible for viewers within each minimum age limit if a maturing rating of the event is same or lower than the age limit. In case of inaccessible, the PVR asks the PIN Code and check the age limit.
MENU OPERATIONS Language Setting There are many languages available for the menu. A. Menu Language It is an item for changing the language of the Main menu. Select the language that the menus will be shown in. * The supported language can be changed without any notice. B. Subtitle Language It is an item for changing the language of the subtitle. As long as the services support it, the subtitle language is changeable by pressing subtl button on your RCU.
MENU OPERATIONS automatically by the SCART functionality. D. TV Aspect Ratio Select your TV screen format. Select 4:3 or 16:9 mode by using V- , V+ buttons. E. 16:9 Display Format If you have a TV set with the 4:3 picture format and transmission is in 16:9, you can select the display format. Select the Letter Box or Center extract by using V- , V+ buttons. F. Sound Mode It allows you to configure the sound mode. Select the Stereo, Mono, Left and Right mode by using V-,V+ buttons.
MENU OPERATIONS A. MediaHighway EPG To enable the Canal EPG function, select On. Select On or Off by pressing V- , V+ buttons. B. Satellite Name This menu is selectable while the MediaHighway EPG menu is On. Select a satellite you want to select TPs from it. C. Home Transponder This menu is selectable while the MediaHighway EPG menu is On. Select TPs you want to select to get the Canal EPG. D. Tuner Select This menu is selectable while the MediaHighway EPG menu is On.
MENU OPERATIONS Timer Setting To insert new entry of Timer Setting, press red (Red) Button. Press OK button to edit the entry, and press GRN (Green) button to delete the selected entry. There are Record ON and OFF modes in Timer Setting. O K 01 21 FASHION TV 08/03-Wed 11:39 30Min OT 02 70 DWtv 07/02-Mon 13:00 60Min WL Service Number Service Name Reseved Date and Time to Start recording R Mode Duration Record A.
MENU OPERATIONS - Date : Select the recording start date by pressing V- , V+ buttons. - Start Time : Select the recording start time. V- , V+ buttons and 0 – 9 buttons are available. - Duration : Select the recording duration by pressing V- , V+ buttons. - File Name : To change file name as you want, press OK button. The keyboard will appear. - OK : To confirm the setting for the reserved recording, press OK button. B.
MENU OPERATIONS Recorded Services List The file list is displayed by pressing F-list button. The file list of Recorded Services can be selected by revs , FWD buttons from other list. 1. You can see the file number, file name, date of recording, information of scramble, locking, Service name, event information, file size, HDD information, etc. 2. Folder A new folder can be made by pressing Geeen (Green) button. The new folder will be named as GROUP #. The name can be changed by option blue (Blue) button.
MENU OPERATIONS press OK or ply button to playback the multi-services in sequence automatically. This function is very convenient for you to descramble the pay TV service with proper CAM module and smart card. You can descramble the scramble services and copy it while you are not using this PVR. 9. Successive copy of Services Select the services you want to copy by pressing F1 (Red). You can start copying by pressing rec button. 10.
MENU OPERATIONS 8. Play by folder To play the files in specific folder, select a folder and press ply button. 9. Select Play mode To select a play mode of MP3, press white (white) button. There are normal, repeat one and repeat all modes. Program File List The file list is displayed by pressing F-list button. The file list of Program files can be selected by revs , FWD buttons from other list. 1. You can download the TAP(Topfield Application Program) via USB from PC using Altair.exe.
MENU OPERATIONS Installation LNB Setting The Low Noise Block down Converter (LNB) amplifies the signal received by the satellite dish and lowers the frequency of the signal. The signal is then fed from the LNB at the dish via cable to the PVR. For the LNB Setting, move the cursor to Installation item and press OK button. Then, move the cursor to the LNB Setting item and press OK button. A. Satellite Name Press OK button to display the Satellite List. The list of Satellite is put in alphabetical order.
MENU OPERATIONS D. LNB Frequency Select the L.O. Frequency of the LNB. The LNB Frequency of 5150, 9750, 10600, 10750, 11475, 9750/10600 or 9750/10700 can be selected by V- or V+ button. Also you can insert LNB frequency by using Numeric key on the RCU. E. LNB Power Select LNB power On to output the LNB voltage. F. 22 KHz If you are using a 22 KHz tone switch box, make 22 KHz tone switch enable or disable to select LNB or antenna.
MENU OPERATIONS The PVR is designed to be DiSEqC 1.1 compatible. This allows multiple antennas to be connected to the PVR at the same time. If you are using two or more fixed antennas or LNBs, then it is recommended to use a DiSEqC 1.1 switch. If you use a DiSEqC 1.1 switch only, it is possible to connect up to 4 antennas. Set the DiSEqC 1.0 to Disable and select an item in DiSEqC1.1. If you use a DiSEqC1.1 switch and DiSEqC1.0 switches, it is possible to connect up to 16 antennas. Connect the DiSEqC1.
MENU OPERATIONS A. Satellite Name Press OK button to display the Satellite List Box. The list of Satellite is put in alphabetical order. Select one of the preprogrammed satellites that correspond to the direction of the antenna. If the desired satellite name is not in the list, then select Other. B. Search Mode There are 4 search modes, There are 4 search modes, Auto, Manual, Advanced and SMATV. The Auto mode enables you to search using the information the PVR has.
MENU OPERATIONS To ensure the above Video, Audio and PCR PID change, press OK item. button at this H. FTA/Scrambled Choose your favorable services you want to search among FTA only, CAS only and FTA+CAS. I. Tuner Select Select a tuner for service searching from the selected service. J. Start Search... To start the searching process, press OK button at this item. To stop the searching process on the way, press either the menu button or the exit button.
MENU OPERATIONS Motorized DiSEqC 1.2 If you have DiSEqC 1.2 motorized system, then you can use the DiSEqC 1.2 functions. A. Satellite Name Select a satellite name that will be used to identify a motor position. B. Tuner Select Select a tuner that is connected with DiSEqC 1.2 system. C. Transponder Select the transponder to catch the strong signal. Select the TP from TP list box to get the strong signal. D. LNB Setting Please refer to LNB setting of this chapter. E. Motorized DiSEqC1.
MENU OPERATIONS H . Motor Control - Goto : Move the motor to the stored position of the selected satellite. - Store : Store the current position of the motor for the selected satellite. * The followings are available only at the Installer mode. - Recalculate : Recalculate the position of the Stab Rotor motor. - Goto Ref : Go to reference. - Limit E , Limit W : Set the limits of East and West position. - Limit Off : Remove the limitation.
MENU OPERATIONS A. Tuner Select Select a tuner that is connected with USALS system. B. Motorized DiSEqC1.3 Select Enable or Disable. If you are using DiSEqC1.3 switch, set to Enable. C. Satellite Name Select a satellite that will be used to identify a motor system. D. Satellite Angle It is the longitude of the selected satellite and it can be set automatically in case of selecting a satellite name. You can use numeric keys of RCU to enter the angle. East or West will be selected by V- , V+ button. E.
MENU OPERATIONS Factory Setting All the stored data can be reset just like it was manufactured. The factory setting has two steps. The first is to reset the service data and other system configurations except Motorized DiSEqC1.2 setting. The second is to reset the parameters of Motorized DiSEqC 1.2. Format Hard Disk To format the HDD in PVR, Press OK button at this Item. Formatting Hard Disk will delete all the data and the files recorded in HDD permanently.
MENU OPERATIONS Notes: Please proceed this menu with connecting the PVR of same model and same specification. Firmware Upgrade At this menu, you can download the latest PVR software from Satellite. The TP details are as bellows. Astra FREQUENCY : S/R: Polarity : PID : Hotbird 4 FREQUENCY : S/R: Polarity : PID : 12603 MHz 22000 KS/s Horizontal 347 12673 MHz 27500 KS/s Vertical 730 For OTA (Over - The - Air Upgrade), it takes around several minutes to download software from the Satellite.
MENU OPERATIONS Organizing Svc/Fav Organizing Services This menu can be used to rename, reorder, lock, hide and delete TV Services. A. Browse Press OK button. Now, browsing through the Organizing Services is possible. Press assigned buttons on the help message. B. Rename Use P+ , P- buttons to select Rename item and press OK button to move the cursor to the Service List. Press OK button to display keyboard, and rename the service. After renaming it, be sure to save it by pressing OK button at Save item.
MENU OPERATIONS C. Move You can reorder and move the service to the preferred position. Mark the desired service to move and press OK button. Use P+ , P- buttons to choose the Move mode. D. Lock You can restrain and lock the services. From here, locking (and later unlocking) services in any of the lists is possible e.g. in order to prevent children from watching it. If a locked service is selected, you should enter the PIN code in order to enjoy it. E. Skip You can hide and skip the services.
MENU OPERATIONS This mode is helpful in adding and deleting services to and from the favorite group. Under the menu Organizing Favorites, there are three different modes: Fav List , Fav Services and TV or Radio Service List. On the Fav List mode, four standard lists are selected as the default menus: News, Sports, Movie and Music. Up to 30 lists including these lists can be added and renamed.
MENU OPERATIONS Check the PVR’s system information here. It shows the System ID, Loader Version, Device Version, Application Version and Last Update. Calendar Press V- or V+ button to select the year. Press P+ or P- button to select the month. Common Interface The menu differs according to each inserted CAM. If the module has not been installed yet, the phrase Not Installed will be indicated.
FUNCTION GUIDE FUNCTION GUIDE Service List Press ok button to see the Service List. The Service List displays as follows. • Service provider. (It can be displayed by pressing chk button.) • Service List by T1 (Tuner 1) or T2 (Tuner 2). • Scrambled Mark by $ . By using WB (White) button in the Service List, you can use the functions as follows. • RB (Red) button: Display the Service List of Tuner 1 or Turner 2. • GB (Green) button: Sort the Service List by Alphabetic.
FUNCTION GUIDE Information Box Press info button on the RCU to see the program information. The Information box displays as follows: . Service Number . Service Name . Detailed Program Information . Signal Level and Quality . Tuner Information . Information of subtitle and / or teletext . Parental Lock You can hide the Information Box by pressing info button.
)81&7,21 *8,'( jUGtwZG %LWUDWH 7LWOH ,FRQ $UWLVW $OEXP 'XUDWLRQ 7LPH 3URJUHVV %DU (3* (OHFWURQLF 3URJUDP *XLGH 7R GLVSOD\ WKH LQIRUPDWLRQ DERXW FXUUHQWO\ EHLQJ EURDGFDVWHG DV ZHOO DV WKRVH WKDW ZLOO EH EURDGFDVWHG QH[W SUHVV EXWWRQ RQ WKH UHPRWH FRQWURO XQLW ,I (3* LV DYDLODEOH RQ SURJUDPV \RX ZLOO VHH WKH GHWDLOHG GHVFULSWLRQ RI WKH SURJUDPV VWDUW HQG WLPH DQG SURJUDPV VFKHGXOHV HWF wR wT EXWWRQV ZLOO EH XVHG WR PRYH SURJUDP DQG WR VHH QH[W SURJUDP VFKH
FUNCTION GUIDE jUGtwZG ICON Title Information icon Bitrate Progress Bar Artist Album Duration Time EPG (Electronic Program Guide) To display the information about currently being broadcasted as well as those that will be broadcasted next, press guide button on the remote control unit. If EPG is available on programs, you will see the detailed description of the programs, start/end time and programs schedules etc. P+ , P- buttons will be used to move program and to see next program schedules.
FUNCTION GUIDE In the software emulation mode, you can watch the teletext even though your TV does not support teletext. You can watch the teletext using the RCU of PVR. Press Teletext ( ) button to watch the teletext with software emulation mode. Press tlx button once more or EXIT ( ) button to escape from teletext. Sound Track You can choose a language of soundtrack by pressing Aud button when a broadcaster supports various languages of soundtrack.
FUNCTION GUIDE 1. To use Time Shifting function, the Time Shifting option should be enabled. To find the Time Shifting option menu, follow the steps below. Main Menu System Setting Time Shifting Enable 2. Press ply button to display Time Shifting progress bar. You have to press ply button once more to display Time Shifting progress bar during Trick mode. (such as Fast Forward, Reverse Playback, Slow motion) 3. To go to the desired playback position, press V+ , FWD button or V- , RVS button.
FUNCTION GUIDE Recording, Checking and Editing the reserved delayed recording To record services, refer to the following steps. There are four kinds of recording references. Caution : If the recording time is less than about 1 minute, the recorded file will not be saved. Immediate Recording by RECORD button A. Recording Press rec button to record the service you are watching. To specify the stop time, go to End of recording Window and modify Duration item.
FUNCTION GUIDE 4-2. Record continue To restart recording, select Record continue. Note : If you would like to continue recording in pause, press rec button in order to see End of recording Window. Then, continue item will appear. C. Checking and modification A Recording Icon ( ) will be displayed on the upper rightmost of the TV screen for several seconds if the recording is initiated. Press info button to see the Recording Icon. To check and modify the recording options, go to End of recording Window. D.
FUNCTION GUIDE B. Checking and modification Press guide button to display EPG. The reserved services for delayed recording will be marked with a Recording mark ( ) or Reserved Event mark ( ). Pressing the rec button once more at the service can modify the parameters of delayed recording. If you press the rec button in the modification window, the modification will be canceled. C. Cancel Press guide button to display EPG.
FUNCTION GUIDE - Lock D. Delete File : Press intvl button to delete the recorded service. E. Event Info : Press info button to display extended event information. 3. Select a recorded service at the list. 4. Press OK button to start playback. 5. Press ply button to display Time Shifting progress bar. You have to press ply button once more to display Time Shifting progress bar during Trick mode. (such as Fast Forward, Reverse Playback, Slow motion) 6.
FUNCTION GUIDE 1. Pause from live video If the PAUSE is kept more than 10 seconds with enabled Time Shifting mode, the live picture is changed to time-shifted playback. The video continues from the paused image when resumed from PAUSE. 2.Pause from Time Shifting The video continues from the paused image when resumed from PAUSE. 3. Pause from Playback The video continues from the paused image when resumed from PAUSE. Slow Motion Playback 1. To playback in slow motion (without sound), press the slow button.
FUNCTION GUIDE Reverse Playback 1. If there is a Time Shifting or Playback progress bar, remove the progress bar by pressing play button. 2. Press revers button for reverse playback. To change the playback speed, press revers button repeatedly. 3. There are 3 steps (1,2,3) in reverse playback. 4. Press ply button to resume playback with normal speed. 5. The reverse playback function is available for the playback and the time-shifted playback.
FUNCTION GUIDE 3. Delete a bookmark To remove a bookmark, you have to display the progress bar by pressing ply button. Select the bookmarked position by GO TO BOOKMARK( ) button and press BOOKMARK ( ) button. 4. 30 seconds forward If there is no preset bookmark, the PVR plays every 30 seconds forward by pressing GO TO BOOKMARK ( ) button. Recording The Descrambled Live Service 1. Select the live picture you want to record. Descramble the service with a proper CAM and smart card.
FUNCTION GUIDE Caution : If the descrambling time is less than about 1 minute, the recorded file will not be saved. Repeated Playback mode The repeated Playback mode works only in playback mode. It does not work in time shifting mode. There are two repeated Playback modes. 1. Repeating the whole selected service. a. Start playback a recorded service. b. Press Intvl button without the progress bar to repeat the whole selected service. c. Press Intvl button once more to cancel the repeating playback. 2.
FUNCTION GUIDE 1. Select and playback a service to copy. 2. Press ply button to display Playback progress bar. 3. To go to the desired position, press revs button or FWD button. 4. Start playback the recorded video you want to copy. The fast/slow motion copying is possible by fast/slow motion playback. 5. Start copying by rec button. 6. The video displayed on TV will be copied. 7. Press stop button to stop copying. 8. Press stop button again to stop playback.
FUNCTION GUIDE Time Shifting while Recording During single recording, Time Shifting is possible. But, if you are recording 2 services at the same time, Time Shifting is possible only in the recorded service. Zapping while Recording For the tuner being recorded with, all the services in the same Service can be selected. For the other tuner, all the scanned services can be selected. Picture In Picture (PIP) 1. Press RED(Red) button to display PIP.
FUNCTION GUIDE Dual Recording 1. Press rec button to start Recording. 2. You can use the Time-shifting function while recording another service. It is possible to record two services at the same time, too. 3. To record the 2nd service, press rec button at the service you want to record. 4. You can check the status of recordings in the recorded service list. To check it, move the cursor to the file that is being recorded. You can stop the recording there, too.
SOFTWARE UPGRADE AND PC INTERFACE SOFTWARE UPGRADE AND PC INTERFACE Software Upgrade The PVR has stable and convenience software to use. But, to improve the PVR the new software of the PVR may be released. Whenever a problem is found or functions are added or modified, the software in the PVR has to be upgraded to enjoy better function. The latest news, software, utility, driver, product and manual will be found at Topfield website http://www.i-topfield.
SOFTWARE UPGRADE AND PC INTERFACE File download and upload via USB You can upload or download the TAP(Topfield Application Program), MP3 and the recorded services to or from your PC. You need to the Altair.exe to enjoy it. You can download the TFD-down.exe, TFDN_USB.exe, Altair.exe at Topfield website http://www. i-topfield.com The TAP application can be developed and used by users. The users can make their own functions by TAP.
0(18 0$3 0(18 0$3 0RGH /RFDO 7LPH *07 7LPH 6HWWLQJ 7LPH 2IIVHW *07 &ROOHFWLRQ 6DWHOOLWH 7UDQVSRQGHU 'D\OLJKW 6DYLQJ 7LPH &HQVRUVKLS 3DUHQWDO &RQWURO &KDQJH 3,1 &RGH 6\VWHP 6HWWLQJ /DQJXDJH 6HWWLQJ $FFHVV &RQWURO 0HQX /DQJXDJH 6XEWLWOH /DQJXDJH $XGLR /DQJXDJH 79 7\SH 9LGHR 2XWSXW 9&5 6&$57 7\SH $ 9 2XWSXW 6HWWLQJ 79 $VSHFW 5DWLR 'LVSOD\
0(18 0$3 6DWHOOLWH 1DPH 7XQHU 6HOHFW &RQQHFWLRQ 7\SH /1% )UHTXHQF\ /1% 3RZHU .
SPECIFICATIONS SPECIFICATIONS Tuner & Service Decoder Item 2 Tuners Specification Decoding & recording(or decoding) Input/Loop through Connector 75: ,IEC 169-24, Female Frequency Range 950 ~ 2150MHz Signal Level Input -65 ~ -25dBm Vertical:+13.5VDC LNB Power & Polarisation Horizontal:+18VDC Current:Max. 500mA with Overload protection Frequency:22±1KHz 22KHz Tone Amplitude:0.6±0.
SPECIFICATIONS A/V & Data In/Out Item Specification Video CVBS/S-VIDEO/RGB/YUV output TV-SCART Audio L/R output Video CVBS output Audio L/R output VCR-SCART Video CVBS/S-VIDEO/RGB/YUV input bypass Audio L/R input bypass S-VIDEO Video S-VIDEO output Video CVBS output RCA A/V Audio L/R output S/PDIF Digital audio or Dolby AC-3 bitstream output 9 pin D-sub type RS-232C Transfer rate 115.2Kbps USB USB2.
www.i-topfield.com 110T-FK213-205-0 rev.