Operation Manual

14 Setup

2.4.2 Connecting to your television set

For all the following connections of the digital receiver, we

recommend you use the ﬁrst connector to get the best picture

quality. If your television does not have a matching connector,

then use the next connector in the following order for a better

picture quality.

1. SCART connector (TV)

2. S-Video connector (S-VIDEO)

3. Composite connector (VIDEO)

4. RF connector (RF OUT)

You should conﬁgure audio and video settings after connecting

up the digital receiver. See § 3.2 for a detailed description.

To use the SCART connector

For best results with a standard television set,

you should use a SCART cable. Plug one end

of the cable into the TV socket on the digital

receiver, and plug the other end into a free

SCART socket on your television.

Some televisions have inputs via S-Video or

Component connectors rather than SCART.

If you have such a television, use an appropriate conversion ca-

ble to link the TV socket on the digital receiver to the matching

socket on your television.

If you connect with a standard SCART cable, you do not have

to make audio connection because the SCART connector can

output stereo audio. But if you use a conversion cable, such as

SCART-to-Component, you have to make audio connection.