Operation Manual

3.3 Local time setting 23

Apart from this setting, you can change the sound mode with

the button. See § 5.2.4 for a detailed description.

3.2.6 Radio frequency output

If you have connected your television to the RF OUT socket of

the digital receiver, you should conﬁgure the radio frequency

output. The digital receiver can make analogue television from

digital television and output it via the RF OUT socket.

Set the RF Output option to the television standard that your

country supports referring to Table 3.1.

Table 3.1: Television standards by country

Signal type Country

PAL G

Australia, Austria, Cyprus, Czech Republic, Egypt, Estonia, Finland, Germany,

Greece, Iceland, Iran, Israel, Italy, Kuwait, Latvia, Libya, Lithuania, Luxem-

bourg, Netherlands, New Zealand, Norway, Portugal, Slovakia, Slovenia,

Spain, Sweden, Switzerland, Syria, Yugoslavia

PAL I Hong Kong, Macao, Republic of Ireland, South Africa, United Kingdom

PAL K Czech Republic, Hungary, Poland

NTSC M

Bahamas, Belgium, Bolivia, Chile, Ecuador, Fiji, Guam, Jamaica, Mexico,

Panama, Peru, United States, Venezuela

Set the RF Channel option to a channel number as you desire.

Then you have to retune your television set to the new channel

number.

3.3 Local time setting

You should set your local time for timer events.