Operation Manual

28 Service Search
Chapter 4
Service Search
After connecting up the digital receiver, you will need to per-
form a service search.
4.1 Searching broadcasting services
To perform service search, select
the Installation > Service Search
menu. You should see a screen
like the left figure. If you have
an antenna booster, you should
set the Antenna Supply 5V op-
tion to On to supply power to
it.
You should set the Search Mode option to Auto for the first
time after connecting up the digital receiver; then the digital
receiver will search for all available services.
You may choose to only search for services of a specific trans-
ponder because more than one service are provided via each