User's Manual

the rope isn’t taken out in 60 seconds, device will lock again, and LED indicator goes off.

Lock: After lock successfully, RFID LED indicator will be fast flashing for 2 seconds then off.

Wake up the device: Device gets the wake up info, RFID LED indicator will show slow flashing

300 seconds or get the unlock command from server side then switch to unlock process.

Incorrect RFID Card or Correct RFID Communication Error: Network & GNSS & RFID LED Fast

flashing 5 seconds.

Lock Error: Network & GNSS & RFID LED on (The maximum duration of continuous light is 300

seconds then off or the error disappear) – This is mechanical failure.

Unlock Error: GNSS & RFID LED on (The maximum duration of continuous light is 300 seconds

then off or the error disappear) – This is mechanical failure.

5. Installation Guide

5.1 SIM card pre-installation note

5.1.1 SIM card data service should be enabled.

5.1.2 If SIM card is locked via PIN, please unlock it first.

5.1.3 Ensure there is sufficient balance in the SIM card.

5.2 SIM card installation and tracker power switch

5.2.1 Open the tracker SIM card cover with the screwdriver.

5.2.2 Unlock SIM cover and insert sim card then lock. Turn the power switch from off

to on.

5.2.3 Put the cover back and use screwdriver to fix the cover tightly.

5.3 Fix Screws