Installation Manual

-01-
-02- -03-
INSTALLATION INSTRUCTIONS
USB Rating ............................ Two USB ports with total 4
.8 Amps, 5VDC
Wire Terminals .................................................................... #14-#12AWG
Operating Temperature .................................. -4° to 140°F (-20° to 60°C)
USB Compatibility ......USB 1.1/2.0/3.0 devices, including Apple products
Strip Length .............................0.5 inch (Back Wiring), 1 inch (side wiring)
• Industry's first Dual USB High Speed Charger at 4.8 Amp, 5VDC
• Charge most compatible electronic device directly without an adapter
• Tamper-Resistant Shutters provide compliance with 2011 NEC Code
• Replace a standard duplex receptacle
• Back and side wire for easy installation
• Interchangeable Color Face Cover
• UL listed
FEATURES
TOPGREENER TU21548A/TU22048A, is the Industry's first 4.8A,
5VDC, Our High Speed USB ports deliver the most advance charging
needs of each device simultaneously and optimizes the current by a
smart chip to reduce charging time. Our High Speed USB chargers give
you the ability to charge virtually any device without the use of bulky
adapters that can be lost or misplaced, while continuing to power
traditional electronics, i.e. lamp or television in the same receptacle.
interchangeable face dual USB charger with tamper resistant
receptacle.
 Cafeteria
 Office
 Kitchen
 Bedroom
 Restaurant
 Meeting Room
 Living Room
 Labs
 Salon
 Hotel
 School
 Library
 Work Station
 Airport
INSTALLATION
SAFETY WARNING : Read and understand these
instructions before installation. This device is
intended for installation in accordance with the
National Electrical Code and local regulations. It
is recommended that a qualified electrician perform
this installation. Make sure to turn off the circuit
breaker or fuse(s) and test that the power is off
before wiring the device.
Wiring Diagram :
1. For retrofit applications, remove wall plate and mounting screws.
2. Carefully remove existing receptacle from the junction box.
3. Disconnect wires from the old receptacle.
4. Connect TU21548A/TU22048A per Wiring Diagram (Figure 1).
5. Insert straight wires to each appropriate terminal and tighten
screws firmly. Neutral to silver screw and Hot to brass screw.
6. Mount the TU21548A/TU22048A in the junction box with screws
provided and mount wall plate.
7. Restore power at circuit breaker.
Figure 1
 iPad®
 iPad ® Mini
 Tablets
 Mobile Phones
 Blackberry , Android Phones
 Windows Phone by HTC
 Kindle
TM
, Nook e-reader
 iPhone®
 iPod®
 GPS
 Galaxy Tab
TM
 Bluetooth
TM
Headsets
 Digital Cameras
 Other USB compatible products
If the devices combined power requirements exceed the power
capacity of the USB Ports, the charger will automatically protect
your devices.
WARRANTY
TOPGREENER offers 2 years warranty on this product to be
free of defects in material and workmanship. This warranty is
void if this product is installed improperly or in an improper
environment, overloaded, misused, or altered in any manner.
TOPGREENER is not liable for consequential damages arising
out of, or in connection with the use or performance of this
product or other indirect damages with respect to loss of
property, revenue or profit or cost of removal, installation or re-
installation.
Figure 2
May, 2016
TU21548A/TU22048A
Ult
ra High Speed Dual USB Charger with
15/20A Duplex Tamper Resistant Receptacle
Interchangeable Face Cover
Receptacle Rating .................................................. 15
/20 Amps, 125VAC
APPLICATION
SPECIFICATION
Receptacle Dimension .............................................3-3/4”×2-1/4”×3-3/16”
COMPATIBILITY
The Ultra High Speed Dual USB Charger/Tamper-Resistant
Receptacle compatible with a wide range of electronic devices
including, but not limited to the following:
To replace the USB
module, Use a flat
screwdriver to pry-off
the interchangeable
face cover
Charge Most USB Powered Devices
DESCRIPTION
TU21548A/TU22048A
USB15L-CC
USB20L-CC