Operation Manual

32
COM A I/O Settings
This option box allows you to enable or disable (
None ) serial port
COM A. If you decide to enable this serial port you should
allocate a serial and interrupt address to it.
COM B I/O Settings
This option box allows you to enable or disable (
None ) serial port
COM B, by default used for the infrared port. If you decide to
enable this serial port you should allocate a serial and interrupt
address to it.
Mode Setting for COM B
This option box allows you set an infrared mode for serial port
COM B.
DMA Setting For Fast IR
This option box allows you to allocate a DMA address to COM B
when using Fast IR mode. If you are not using this infrared mode,
this box will be grayed out.
LPT Port
When you select this option, a dialog box will pop up allowing you to
customize the parallel port located on the rear of the notebook.
Port Address
This option box allows you to enable/disable (
None ) the parallel
port in the back of the notebook. If you decide to enable the
parallel port you should allocate an LPT and interrupt address to
it.
Port Definition
This option box allows you to set a port mode for parallel
communications.
EPP Type
This field allows you to set an EPP type for the parallel port. If
you are not using EPP mode, this box will be grayed out.