Operation Manual

17
Getting Started
Before you begin to use your notebook, read this chapter to become
familiar with some of the procedures and operations that are used with
the system.
Connecting Power to the System
Your notebook can operate through the AC adapter connected to a wall
outlet, or it can operate from the removable, rechargeable battery
installed in the left side of the unit.
When you are using your notebook for the first time, it is essential that
you use the AC adapter connected to a suitable power supply. The
battery in a newly purchased system is usually fully discharged or has
just a little charge remaining. When you first use the notebook, you
must have sufficient power to complete the Windows initialization
process without running out of power.
The AC adapter is auto-sensing so it can use any available power
supply from 100 volts through to 240 volts (± 10%VAC) with a
frequency ranging from 50 to 60 Hertz. The AC adapter will
automatically convert the AC power to a 20-volt (± 1V) direct current
supply that your notebook can use. The AC adapter is also used to
recharge the rechargeable battery.
Direct current
cable
Power indicator
light
AC power cord
C
HAPTER
2: G
ETTING
S
TARTED