Operation Manual

need for the system. Depending on the configuration of your

notebook, you may not need to install all the software on the utility

CD.

9. The software is installed in separate folders, and there may be sub-

folders which contain different language versions, or different

versions for different operating systems such as WIN95, WIN98,

WinNT and so on. The names of the folder will indicate what they

contain.

10. Look for a README file inside the folder of the software that you

are about to install. It may contain special installation instructions,

or updated information that is not included in this section.

11. Look for the installation program and run it. This program is usually

called SETUP or INSTALL. Follow the instructions on the screen to

install the drivers and/or utilities.

12.

You will probably need to install the following software from utility

CD:

Touchpad: Driver/Utilities

Video: Drivers/Utilities

Audio: Drivers/Utilities

PC Card Drive: Drivers/Utility

Fax/ Modem (option): Driver/Utilities

CD-ROM: Driver/ Utility

Using the Drives

You can learn a lot about your computer by using the windows

Computer

utility. If you click on this icon, it will show a graphical

representation of the media devices on your system. Depending on the

configuration of your system, your notebook will probably have the

following devices: