Operation Manual

25
Navigating
The main screen of the utility program is divided into three major
sections.
The top section holds a menu bar.
The middle section shows three windows, i.e.
Devices, System
and
Memory
. These windows provide a quick overview of the current setup
settings of your system. Some values are detected automatically while
other values are set to a default value and can be changed through the
menu bar at the top of the screen.
The third section, at the bottom of the screen, displays hints and help
messages relevant to the topic highlighted at the moment.
[Alt]: Press the Alt key to activate menus.
Cursor arrow keys: Lets you move and highlight through the
header list of setup windows.
[Enter]: When the option you need is highlighted, press this key
to select an option.
[Esc]: Cancels the current action, closes a menu, returns you to
the main menu, and/or exits the System configuration Utility
program.
Startup, Memory, Disks, Components, Power
, and
Exit
, are the
principal options in the main menu bar for system configuration. When
you select one of these options, the screen displays a list of items in a
drop down menu. Some items you can only enable or disable. Others
bring up a separate dialog box once you select them.
_ or V: Items that can only be enabled or disabled
: Items that hide a separate dialog box.
Within a dialog box you can use:
[Tab] to select a control.
[OK] or [Enter] to confirm an entry.
[Cancel] or [Esc] to cancel an entry.
To change the value of a field, use the cursor keys, space bar, and/or
numeric keys.