Operation Manual
37
Suspend Timeout
This value sets the timeout for the system Suspend mode. If the
system has been idle for the selected period of time, the system
will enter the user defined suspend mode. The value can be set
to either
Never
, or to a value ranging from 1 to 30 minutes.
Resume Timer
When you select this item, a dialog box will pop up allowing you to set
a specific date and time for the system to wake up from suspend mode.
Alarm Resume
You can either enable or disable this option. If this field is enabled, the system
will wake up from suspend mode at the date and time set below. If the field is
set to disabled, the date and time set in the fields below will have no effect.
Resume Month/Resume Day/Resume Hour/Resume Minute
These fields allow you to set a specific date and time for the
system to wake up from suspend mode.
Exit
When you have made changes to the setup utility, either press the
[Esc] key, or highlight the Exit option on the menu bar.
Save and Exit
When you select this item, a dialog box will pop up asking you to
confirm your choice to save the changes you just made and restart the










