User Manual

9.4 recycle bin
How to Delete APP Administrator
A. Put User phone near the lock, delete the Administrator in the phone APP
until speaker says "Deleted Administrator successful" ;
B. Long press "RESET" button until speaker says "please input initialization
passcode ("000→#"), and speaker says "Deleting Administrator successful".
How to Change Language
Format: " *→39→#→management passcode→#→1 or 2 →#.
Note:1 Chinese 2. English
If App is not required for the lock, you can use the card and passcode for
normal operation, the program and operation as below:
1. Change Management Passcode (default 123456)
Format: “ *→12→#→original passcode→#→new passcode→ #→new passcode→#”.
Follow the format and voice guide until speaker says “Operation successful”.
2. Add User Passcode / User Card/ Fingerprint
A. Add User Passcode(s)
Format: “ *→85→ #→management passcode→#→user passcode→#→ user
passcode → # ”
Follow the format to add user passcode(s) and voice guide until speaker
says “input successful”.
B. Add User Card(s)
Format: “ *→85→ #→management passcode→ #→ scan user card(s)”
Follow the format to add user or user card(s), and voice Fingerprint
guide until the speaker says “operation successful”.
3. Change User Passcode
Format: " *→10→#→original passcode→#→new passcode →# →new
passcode→#".
TraditionalFunctionswithoutAPP(Optional)
1716
10. gateway management
The Smart lock is directly connected via Bluetooth,
that is why it is not attacked by the network. The gateway
is a bridge between smart locks and home WIFI networks.
Through the gateway, the user can remotely view and
calibrate the lock clock, read the unlock record. Meanwhile,
it can remotely delete and modify the passcode.
Please add the gateway via APP:
A. Connect your phone to the WIFI network which the gateway is connected to.
B. Click the plus button in the upper right corner and input the WIFI passcode and
gateway name. Click OK and input the
passcode for authentication.
C. Press and hold the setting button on
the gateway for 5 seconds. The green
light indicate that the gateway has
entered the add-on mode.
10.1 gateway adding
10.2 manual
If the lock is damaged and cannot be deleted,
the lock can be deleted by moving it into the
recycling station.
After a short period of time, you can see which locks are in their coverage in
the app. Once the lock is bound to the gateway, the lock can be managed through
the gateway.