User Manual
,it
2322
Maintenance
After-saleService
7、Insert the plug of the front
lock into socket of the rear
lock, and insert the thin
bar into the hole of the
knob.
8~9、 Fix the rear panelon
the mounting plate with
3 screws
10、 Load 4 AA alkaline batteries
in the battery holder of the
rear panel, and then fix the
battery cover with a screw.
11、 According to the actual size of the strike box,
drill a hole on the door frame, insert the strike
box, and cover the strike plate, and fix it with 2
screws.
Test and debug: Turn the knob of the rear panel
to check whether the deadbolt protrudes and
retracts smoothly; insert the mechanical key to
check whether the deadbolt protrudes and
retracts smoothly; program the password and
the card, use the password and the card to unlock
to check whether it is sensitive; open/close the
door to check whether the deadbolt protrudes
and retracts in and out of the strike box smoothly,
if it is not smooth and misaligned, please adjust
it until it is perfect.
12、If auto-locking is required when close door,
pls add magnetic device
step7 step8
step9 step10
step11
step12