Smart Door L Manual F(M)006-0A (APP Bluetooth)
Product Introduction 1. Product Description 2. Product Structure 3. Product Dimension 4. Product Features 5. Technical Parameter 6. Function Keys Introductions 7. Basic Functions TTLOCK App 1. registration and login 1.1 security question settings 1.2 login authentication 1.3 ways of identifying 1.4 login successful 2. lock management 2.1 lock adding 2.2 lock upgrading 2.3 error diagnosis and time calibration 2.4 authorized administrator 3. key management 3.1 key management 3.2 deadline warning 3.
9.2 group management settings 9.3 transfer admin rights 9.4 recycle bin 10 . gateway management 10.1 gateway adding 10.2 manual Traditional Functions without APP (Optional) 1. Change Management Passcode 2. Add User Passcode / User Card/ Fingerprin 3. Change User Passcode 4. Delete All User Cards 5. Delete All User Passcodes 6. Add APP Administrator 7. Indicator Light Prompt Unlock/Lock 1. 2. 3. 4. 5.
3. Product Dimension FAR(False Acceptarce Rate) FRR( False Reject Rate) Fingerprint capacity 100pcs 150pcs 4. Product Features ◆Tilted structure design for better view and convenient operation; ◆Auto locking when close the door(If magnetic device is added); ◆Multiple unlock modes: Fingerprint/passcode/Mifare1 card/phone App; ◆Double locking by switch from inside secures privacy and security; ◆Security passcode; 6.
xxxpasscodexxx. Total numbers must be within 24 digits. Secure Locking from Inside by Switch When moving the security switch to the locking position, fingerprint , passcode, card and phone app can not unlock from outside. TTLOCK App 6.fingerprint mangement 8.(Omit) The App is a smart lock management software. The App communicates with the lock via Bluetooth BLE, via 3.3 search lock record the App manage the lock ( fingerprint, passcode, card, electronic key) and unlock & lock, read access records, 10.
7
8 9
adds to the look successfully, 10 11
Passcode ized 6. fingerprint management Fingerprint management is similar to IC card management. After adding a fingerprint, you can use the fingerprint to unlock the door.
lock icon 9.2 8.
9.4 recycle bin How to Delete APP Administrator If the lock is damaged and cannot be deleted, the lock can be deleted by moving it into the recycling station. A. Put User phone near the lock, delete the Administrator in the phone APP until speaker says "Deleted Administrator successful" ; B. Long press "RESET" button until speaker says "please input initialization passcode ("000→#"), and speaker says "Deleting Administrator successful".
Follow the format to change the original passcode with new passcode, and voice guide until speaker says"operation successful". Unlock/Lock Unlock mode: Phone App; Fingerprint;Passcode; Card; Mechanical Key 4. Delete All User Cards Format: “ *→ 69 →#→management passcode→ #” Follow the format to delete all user cards, and voice guide until the speaker says “ operation successful”. 5.
Installation and Adjustment 110 35 ≥45mm(Cylinder will be specially made) 1、 Drill a large and a small hole on the door for the front and rear panel and drill a round hole on the door frame for the deadbolt according to the 1:1 template. 2、 Insert the deadbolt into the hole of the door frame and fix it with 2 screws.
7、Insert the plug of the front lock into socket of the rear lock, and insert the thin bar into the hole of the knob. step7 step8 Maintenance 8~9、 Fix the rear panelon the mounting plate with 3 screws ,it step9 step10 10、Load 4 AA alkaline batteries in the battery holder of the rear panel, and then fix the battery cover with a screw. 11、 According to the actual size of the strike box, drill a hole on the door frame, insert the strike box, and cover the strike plate, and fix it with 2 screws.
Appendix A B C Mounting panel D Deadbolt E Strike box FGHI Screws(a pack) J Strike plate K Mechanical keys Mifare1 card Template User manual USB charger 24 10 pcs
FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
